Constructed with two or three 304 or 316 stainless steel wire cloth
layers with a steel backing plate and steel frame combined
together. Because of different mesh size and hole size, get a
better filtering effect.
The bottom high strength steel frame, supporting bar with the
moderate tension screen cloth, combined together. Infinitely
enhance the screen intensity and endurance, get a better filtering
effective. Mesh sizes ranging from 20 to 325. The whole cloth is
divided into independent small surfaces, prevent the part excessive
expansive damaged, with a special rubber plug together to repair
damage, can save the time to replace the screen, Increase the
efficiency and reduce the cost.
Main Parameters for FSI 5000 SERIES shale shaker screen :
2 Product name
FSI 5000 SERIES shale shaker screen
Dimension
1067*737mm
Weight
14 kgs
Wire mesh material
S.S304 ,S.S316 (Customizable)
Screen layer
2 or 3 Layers
Mesh
20-325 mesh
Features
1.Resisting corrosion and heat
2.High-efficiency ,high strength, long life, durable
Delivery
Delivery in time
Quality
Compliant with API standard
3 Features of Steel frame screen
1)Different layers with different density. To arrange these layers
reasonably and exactly, the screening effect will become more and
better.
2)High strength frame, multi-ribs and the mesh cloth with moderate
tension , from one reliable combination , which can increase
screen’s acceptable flow , the intensity and the lifetime
3)The wedge-shaped fastening device, can make the erection of
screens more handily and quickly
4)The mesh divided into many independent small units by grids of
the backing plate ,can prevent rips or tears from spreading
overmuch. Accessory prepared rubber stoppers
Shengjia Hardware Mesh Screen,Oil shale shaker screen, steel frame
screen is commonly used petroleum vibrating screen, made of steel
frame support and 2-3-layers stainless steel screen cloth sticky to
the frame. The frame is the high strength steel box section or flat
bar through welding and is attached with multiple high strength
support rods. The screen shouldnt be connected with the frame with
metal lining or sticky to the frame directly.
Note: the mesh range of the screen should be chosen from various
specifications of 10325, according to users requirements. And the
detailed size and details should be fabricated according to the
users requirement.
Model | Mesh | Dimension(mm) | Weight(kgs) |
SJ-1 | 80-300 | 635×1253 | 17.5 |
SJ-2 | 80-300 | 697×1050 | 7.5 |
SJ-3 | 80-300 | 697×1053 | 5.8 |
SJ-4 | 80-300 | 915×1150 | 10 |
SJ-5 | 80-300 | 715×1251 | 11.3 |
SJ-6 | 80-300 | 585×1165 | 12.8 |
SJ-8 | 80-300 | 1150×1000 | 5.5 |