Beijing Jincheng Mining Technology Co., Ltd. |
Verified Suppliers
|
|
TWD300 Trailer Mounted Water Well Drilling Rig
TWD300 Multi-functional trailer mounted water well drilling rig is
a efficient,multi-function full hydraulic water welldrilling rig.It
is high efficiency because of having a larger torque of the
turntable and is mainly used for water well in industry and
agriculture, national defense building foundation, geological
exploration, geothermic well and other foundation working, it is
popular at home and abroad.
TWD300 trailer mounted drilling rig can drilling in all kinds
formations by mud drilling in soft formation and air DTH hammer in
rock drilling,DTH Hammer is applied in rock drilling, slag is
discharged by air pressure and the offstage efficiency is ten times
than traditional rotary drilling.
TWD300 deep water well drilling rigs, in cutting drilling or rotary
drilling can be operated in unconsolidated layer, and the slag can
be discharged under by mud, the impact drilling operation can also
be adopted and slag can be discharged by pressure air, the
hydraulic water well drilling rig suitable for drilling complicated
geological conditions.
Product Parameters
No. | Item | ||
1 | Geology Drilled | All Kinds | |
2 | Drilling Type | DTH & Mud Rotary | |
3 | Drill System and Operation | Hydraulic | |
4 | Hole Diameter | mm | 105-350mm |
5 | Hole Depth | m | 300 |
6 | Rotation Torque | Nm | 7500 |
7 | Rotation Speed | rpm | 0-160 |
8 | Drill Pipe Diameter | mm | 89/114 |
9 | Drill Pipe Length | mm | 3000 |
10 | Most.Feed Length | M/min | 18 |
11 | Most.Lifting Speed | M/min | 5-20 |
12 | Feed Stroke | mm | 3400 |
13 | Most.Lifting Force | N | 120000 |
Winch | |||
14 | Lifting Force of Main Winch(Optional) | T | 4 |
15 | Lifting Force of Hoist | T | 1.5 |
16 | Lifting Height of Tool Winch | m | 6 |
Engine | |||
17 | Diesel Engine Type | CUMMINS | |
18 | Rated Horse Power | Kw | 92 |
19 | Electrical System | Volt | 24 |
Compressor Required | |||
20 | Compressor Type | Rotary Screw/Movable | |
21 | Pressure Required | Mpa | 1.2-3.5 |
22 | Air Consumption | M3/min | 16-40 |
Mud Pump | |||
23 | Power Type | Hydraulic | |
24 | Model | BW450 | |
25 | Stroke | mm | 100 |
26 | Displacement | L/Min | 250 |
27 | Discharge Pressure | Mpa | 2.5 |
28 | Suction Tube Diameter | mm | 85 |
29 | Discharge Pipe Diameter | mm | 51 |
30 | Foam Pump | Optional | |
Dimension | |||
31 | Net Weight | KG | 6100 |
32 | Shipping Length | mm | 5800 |
33 | Shipping Width | mm | 2210 |
34 | Shipping Height | mm | 2850 |
35 | Ground Clearance | mm | 300 |
36 | Volume of Flow | mm | 200 |
Product Configuration
Rotary
Head
4-wheel Trailer
Chassis Full
Hydraulic Control Panel
Drill PipeMud
Pump
Drilling Tower
Product Features
1. The drilling rig can use air DTH Hammer drilling and mud
drilling.
2. Centralized control console is suitable for each manipulation
and control. Rapid pulling and lifting reduce the auxiliary time
and enhance the work efficiency.
3. The main drive system, the transfer case, gearbox, double-winch
unit, mud pump, turntable,drilling tower, feed system are set up on
the chassis.
4. It's a hydraulicrotary drilling rig with directional
circulation. It can equipped with BW450 mud pump which adopts the
slurry as the washing fluid and can drill on clay, sand and rock if
it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Yuchai engine,93kw Yuchai
engine drives the large displacement high pressure plunger pump and
it is characterized by powerful dynamic and stable performance.
6. The rotary head,have two gear,rotation speed is 0-80 and160rpm
step less adjustment and the rotary torque is 6900Nm.
7. The pulling force can be regulated and controlled, which adapt
the machine to deep hole drilling.
8. It can set up a generator which is convenient to welding or
illuminate for work at night.
9. Main winch are available on the rig so it is high efficiency
when the rig drill on mud rock and on the weathering formation.
10. The main drive of rig is hydraulic and the four landing legs
and drilling tower are hydraulic controlled. Transfer case and mud
pump clutch system are also hydraulic operated.
11. The tools winch winch is used for auxiliary lifting and
casing,optional main winch force of 4T, rope length of 100m and 8m
lifting height.
12. The Hydraulic auxiliary functions are easy and efficient for
guide extension, boom swing, boom lift, guide dumping.
13. Competitive in price, low cost of maintain.
Product Loading
FAQ
Q: Are you original manufacturer?
A: Yes, we JCDRILL is a official leading manufacture in drilling
machinery in China and we have the whole series products you need.
Q: Which payment terms are available to us?
A: T/T term or L/C term. On T/T term, 30% down payment is required
in advance, and 70% balance shall be settled before shipment.On L/C
term, a 100% irrevocable L/C without "soft clauses" can be
accepted.
Q: How long will the delivery time take?
A: Normally mud pump products will take about 3-15 days to produce
the ordered machines. Most of the time, we can have an immediate
delivery of our regular machines in 15 days.
Q: How about after sales service?
A: 365×24 Year-round Service We are committed to year-round 24-hour
service even during holidays, in line with our policy of always
providing "a response within 15 minutes and job completion within
24 hours."
Q: Spare Parts When You Need Them
A:We have spare parts centers across continents that stock
specialist spare parts. We promise that spare parts will be
delivered within 72 hours or no more than one week.
RELATED PRODUCTS
TWD200 Trailer Mounted | CSD200 Truck Mounted | JXY200 Vertical Spline |