|
[China]
Trade Verify
Address: Room 1407,BuildingA,No.13,Beiyuan Road,Chaoyang District,Beijing,China
Contact name:Sekura Yu
Beijing Jincheng Mining Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Water Well Drilling Rig Mounted on 4x2 Truck Hard Rock DTH Drilling
Application
CSD200 4x2 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulic water well drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.
CSD200 4x2 truck mounted water well drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.
CSD200 4x2 water well drilling rig, in cutting drilling or rotary drilling can be operated in unconsolidated layer, and the slag can be discharged under by mud, the impact drilling operation can also be adopted and slag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling complicated geological conditions.
Characteristics
1. The drilling rig can use air DTH Hammer drilling and mud drilling.
2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.
3.The truck chassis adopts the 4X2 special crane chassis of brand Foton / Dongfeng and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.
4.It's a hydraulic rotary drilling rig with directional circulation. It is equipped with BW250 (Optional) mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5.The power of drilling rig comes from a Yuchai engine,93kw Yuchai
engine drives the large displacement high pressure plunger pump and
it is characterized by powerful dynamic and stable performance.
6.The rotary head,rotation speed is 0-100rpm stepless adjustment
and the rotary torque is 3200-4500Nm.
7.The pulling force can be regulated and controlled, which adapt
the machine to deep hole drilling.
8.It can set up a generator which is convenient to welding or
illuminate for work at night.
9. Main winch are available on the rig so it is high efficiency
when the rig drill on mud rock and on the weathering formation.
10. The main drive of rig is hydrulic and the four landing legs and
drilling tower are hydraulic controlled. Transfer case and mud pump
clutch system are also hydraulic operated.
11. Competitive in price, low cost of maintain.
| 1 | Geology drilled | All kinds | |
| 2 | Drilling Type | DTH & Mud Rotary | |
| 3 | Operation | Hydraulic Drill System | |
| 4 | Hole Diameter | mm | Φ90—Φ325 |
| 5 | Hole Depth | m | 200 |
| 6 | Rotation Torque | Nm | 3200 1st Gear |
| 4500 2nd Gear | |||
| 7 | Rotation Speed | rpm | 0-80 1st Gear |
| 0-100 2nd Gear | |||
| 8 | Drill rod diameter | mm | 76/89/102/114 |
| 9 | Drill rod length | mm | 3000 |
| 10 | Max. Lifting force | N | 8000 |
| 11 | Max. feed speed | m/min | 18 |
| Winch | |||
| 12 | Lifting force of Main winch(Optional) | T | 4 |
| 13 | Lifting force of hoist | T | 0.8 |
| 14 | Length of steel wire rope(tool winch) | m | 100 |
| 15 | Lifting height of tool winch | m | 8 |
| Engine | |||
| 16 | Diesel Engine type | YUCHAI | |
| 17 | Rated Horse power | Kw | 93 |
| 18 | Electrical System | Volt | 24 |
| Compressor required | |||
| 19 | Compressor Type | Rotary Screw/Movable | |
| 20 | Pressure Required | Mpa | 1.2—3 |
| 21 | Air consumption | m³/min | 11—35 |
| Truck | |||
| 22 | Manufacturer | YUEJIN | |
| 23 | Model | E13N2B00098 | |
| 24 | Engine | YC4E140-42 | |
| 25 | Rated Horse power | kw | 140 |
| 26 | Discharge Standard | EU-2 | |
| 27 | Drive type | 4*2 | |
| 28 | Max.Speed | Km/h | 102.9 |
| 29 | Steering wheel | left | |
| Mud Pump | |||
| 30 | Type | Hydraulic | |
| 31 | Model | BW250 | |
| 32 | Stroke | mm | 110 |
| 33 | Displacement | L/Min | 250 |
| 34 | Discharge pressure (Mpa) | Mpa | 2-3 |
| 35 | Suction tube diameter | mm | 89 |
| 36 | Discharge pipe diameter | mm | 51 |
| 37 | Liner Diameter | mm | 80 |
| Hydraulic Welder | |||
| 38 | Mnufacturer | Dynaset | |
| 39 | Welding current | A | 60-250 |
| 40 | Hydraulic Min.oilflow | L/min | 42 |
| 41 | Nom/Max Pressure | Bar | 190/210 |
| 42 | Voltage | V | 110/220VDC |
| 43 | Power | Kw | 102 |
| 44 | L*W*H | mm | 390*190*230 |
| 45 | Foam pump | Optional | |
| Generator | |||
| 46 | Generator | Optional | |
| Dimension | |||
| 46 | Net Weight | T | 14 |
| 47 | Shipping Length | mm | 8800 |
| 48 | Shipping Width | mm | 2500 |
| 49 | Shipping Height | mm | 3500 |
| 50 | Working size(L*W*H) | mm | 8900*2000*7147 |
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely
the after sales service begin from the order confirmation, last for
the working life of the equipment.
