|
[China]
Trade Verify
Address: Room 1407,BuildingA,No.13,Beiyuan Road,Chaoyang District,Beijing,China
Contact name:Sekura Yu
Beijing Jincheng Mining Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Gasoline Impact ock drilling machine/ petrol Rock drilling tool/Hand hammer rock drill YN30
Application
YN30A hand hold internal-combustion rock drill is a hand-rock drilling tool which integrates the small gasoline-engine,compressor and rock drill. It can blow off the rock powder in the blasthole by the compressing air generated from itself. Just30kg weight for the main engine .
Easy to carry about.Applicable for the areas of high mountains and
of without power and wind pressure equipment,especially for those
temporary projects with frequent movement. Working on the
rocks,available for vertical down drilling,horizontal drilling and
up drilling with the angle of less than 45°.The max. vertical down
drilling depth can be 6m.
YN30 Applicable for rock drilling.if replace a few of the parts,it can also be used as a breaker and a rammer for various work of breaking,shovelling, excavating,splitting and ramming,etc.2. Wide applicability. Regardless of the high mountains,flat grounds, extremely the hot area with the temperature of + 40℃ and bitter cold area of -40℃,it can work in good condition.
1. Applicable for rock drilling. If replace a few of the parts.
2. It can also be used as a breaker and a rammer for various work of breaking, shovelling, excavating, splitting and ramming.
3. Wide applicability. Regardless of the high mountains, flat grounds, extremely the hot area with the temperature of +40℃and bitter cold area of -40℃, it can work in good condition.
Characteristics
1. YN30A (YN30E) handhold internal-combustion rock drill is a hand-rock drilling tool which integrates the small gasoline engine compressor and rock drill.
2. It can blow off the rock powder in the blasting hole by the com-pressing air generated from itself
Just 30kg weight for the main engine
3. Easy to carry about
4. Applicable for the areas of high mountaina and of without power and wind pressure equipment, especially for those temporary projects with frequent movement
5. Working on the rocks, available for vertical down drilling, horizontal drilling and up drilling with the angle of less than 45°the max. yertical down drilling depth can be 8m
Engine:
The engine is a hand operated,single cylinder and two stroke petrol
engine with air cooling,reflux airconversion,no contact
ignition,and no floating-type carburetor.It is composed of control
parts,starter parts,oil tank parts,flywheel
parts,crankshaft,connecting rod,crankshaft case parts,magneto
parts,and piston parts and cylinder parts.
Air Compressor:
The engine piston and hammer piston are mounted separately in the
upper and lower place of the cylinder.These two pistons move up and
down synchronously.The hammer piston and the bigger bore of the
cylinder forma compression chamber,which together with air inlet
and outlet valves and ventilator valves,form the air compressor.It
is composed of hammer piston parts and cylinder parts.
Rock drill:
It is composed of hammer piston parts,rotation mechanism
parts,drill shank housing parts.
Specification
| Weight of the machine: | 30kg |
| Overall dimension: | 760*320*245mm |
| Type of engine: | single cylinder, air cooled two strokes |
| Cylinder diameter*stroke of piston: | 58*70mm |
| Rotating speed of engine: | ≤ 2200r/min |
| Displacement of engine piston: | 185cm³ |
| Type of carburetor: | hand needle valve, no floating type |
| Ignition system: | Controllable silicon contactless system |
| Drilling speed: (mean value of five holes) | 2700-3000r/min |
| Max. drilling depth: | ≥6m |
| Max. elevation angle of drilling: | 45° |
| Fuel consumption: | ≤1.65L |
| Mixing ratio of gasoline and lubrication oil (in volumes): | 12:1 |
| End of drill rod dimensions: | hex.22*108mm |
Packing& Delivery
Service
In our after sales service system, We establish perfect control system strictly according to ISO-9000 series, in this system, technology date and problem solve solution and preventive measures will be provided in any maintain project, all the spare parts will be used in new OEM products with installation instructions, packing list, manufacturer's instruction, qualification and Warranty certificate.
We provide "one equipment & one case, endless service, namely
the after sales service begin from the order confirmation, last for
the working life of the equipment.
