Active Member
|
[China]
Address: Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
Contact name:Mr. Yingkai Zhang
KSQ Technologies (Beijing) Co. Ltd |
|
|
Tungsten Carbide Drill Bit R38 Thread Mining Drill Bits with Flat Face and 14 Ballistic Insert Buttons
Product Description:
Semi-dome bits are designed for fast penetration rates in softer rock like shale and limestone with low silica content.
Drop Center bits will help drill straighter holes in less consolidated rock.
Flat Face bits are a general purpose bit that will perform in all rock conditions but should be used especially for hard or abrasive conditions like granite, basalt, and hard limestone. Flat face bits are the best choice for drilling in abrasive rock.
Products Parameters:
| Product Name: | Thread Button Drill Bit | |||
| Diameter: | 76mm | |||
| Button Size: | Front 6*11 mm Gauge 8*12mm | |||
| Thread: | R38 | |||
| Flushing Hole: | 2 Front and 2 Side | |||
| Application: | Button drill bits are used in granite and marble quarry, gold mine, railway, tunnel, etc. for drilling | |||
| Weight: | 2.8 kg | |||
| Button Type: | Ballistic | |||
| Body Type: | Normal (Not Retrac) | |||
| Face Type: | Flat face | |||
| Material: | Alloy steel bar 45CrNiMoV and tungsten carbide tips YK05 | |||
| MOQ: | No requirement for testing and trial order | |||
We can design and manufature according to your requirment of diameter, number air holes and carbide button shape | ||||
Product Advantage:
1. High drilling speed,better impact-resistance.
2. The service life of our products is 1.2 times of the same industry.
3. The company is an integrated model(production to sales-service).
4. There is a special quality inspection organization, to ensure that the factory products do not defective products.
5. Perfect sales network, widely recognized by users.
Specification of other Retrac Button Bits:
| R Thread Button Bits | |||||
| Description | Diameter (mm) | Buttons No. | Water hole | Buttons angle ° | Weight (kgs) |
| Thread 25R | 38 | 5 | 2 | 30° | 0.5 |
| 41 | 5 | 2 | 30° | 0.6 | |
| 45 | 5 | 2 | 30° | 0.7 | |
| 48 | 5 | 2 | 30° | 0.78 | |
| 38 | 7 | 3 | 30° | 0.54 | |
| 41 | 7 | 3 | 30° | 0.7 | |
| 45 | 7 | 3 | 30° | 0.78 | |
| Thread 28R | 41 | 5 | 2 | 30° | 0.6 |
| 45 | 5 | 3 | 30° | 0.7 | |
| 48 | 5 | 3 | 30° | 0.78 | |
| 38 | 7 | 3 | 30° | 0.54 | |
| 41 | 7 | 3 | 30° | 0.7 | |
| 45 | 7 | 3 | 30° | 0.75 | |
| 48 | 7 | 3 | 30° | 0.8 | |
| Thread 32R | 45 | 5 | 3 | 30° | 0.6 |
| 48 | 5 | 3 | 30° | 0.8 | |
| 41 | 7 | 3 | 30° | 0.54 | |
| 43 | 7 | 3 | 30° | 0.55 | |
| 45 | 7 | 3 | 30° | 0.6 | |
| 48 | 7 | 3 | 30° | 0.8 | |
| 51 | 7 | 3 | 30° | 0.85 | |
| Thread 38R | 64 | 13 | 5 | 30° | 2 |
| 64 | 12 | 3 | 30° | 2 | |
| 70 | 12 | 4 | 35° | 2 | |
| 70 | 13 | 5 | 35° | 2.2 | |
| 76 | 13 | 5 | 30° | 2.5 | |
| 76 | 10 | 4 | 35° | 2.6 | |
| 76 | 12 | 4 | 35° | 2.8 | |
| 76 | 12 | 4 | 35° | 2.8 | |
