XMR303S Small Road Roller

Construction Road Roller 3ton Mini Double Drum Vibratory Road Roller XMR303S

Introduction of Construction Road Roller 3ton Mini Double Drum Vibratory Road Roller

1) Adopt closed hydraulic drive system, which can realize stepless speed change.

2) The braking system adopts three levels of neutral braking, emergency braking and parking braking to ensure the reliability of service braking. The braking distance is short and the braking torque is large to ensure the safety of the product.

3) The front field of view of the whole machine is less than 1×0.75m, and the rear field of view is not blocked, which provides the driver with a good range of sight.

4) A roll protection frame is installed at the rear of the whole machine to avoid the roll of the roller during rollover, which provides safety protection under extreme conditions; it is also equipped with a rotating alarm light and a reversing buzzer to ensure safety during construction. The whole machine is equipped with front and rear working lights to provide convenience for night construction.

5) The vibration system uses an electronically controlled vibration valve to control the vibration mode of the whole machine, which can achieve simultaneous vibration, separate vibration and static rolling of the front and rear steel wheels to meet the needs of different working conditions.

6) The middle hinge structure is adopted, and the front and rear wheels have equal wheelbase design. When turning, the front and rear wheel tracks coincide, the turning radius is small, and the compaction quality is high. The steering system adopts full hydraulic steering, and the steering is light and feels good.

7) The width of the vibration wheel is larger than the width of the frame, which is convenient for observing the compaction of the wheel side during construction.

8) The machine has a large ground clearance and strong product passability. The margin distance is small, the curb gap is large, and the compaction performance of the margin is good. The machine also has an air intake preheating function, which can achieve low temperature cold start.

9) The power adopts water-cooled supercharged engine, and the emission meets Euro III A and National III emission requirements. It can work normally in an environment with an altitude of less than 3000 meters and a temperature of more than -20℃.

10) Electric sprinkler is used, and the front and rear steel wheels have a set of sprinkler heads, and the water mist can evenly cover the entire steel wheel surface.

11) The sprinkling tank adopts a large-capacity plastic water tank with a capacity of 220L, which reduces the time for adding water during shutdown.

12) The front and rear steel wheels are equipped with adjustable scrapers, which can adjust the gap between the scraper and the wheel as needed, and at the same time can make up for the wear of the scraper and extend the life of the scraper.

13) The protective frame adopts a back-folding structure, which reduces the size during transportation and facilitates transportation. The machine adopts a three-stage shock absorption system, which effectively reduces the vibration at work and is comfortable to drive.

14) Adjustable seats are used to meet the needs of drivers of different sizes.

15) The front of the engine, all maintenance points are exposed when the hood is opened, which is easy to access and convenient to maintain.

Technical specification of Construction Road Roller 3ton Mini Double Drum Vibratory Road Roller

Packing and Delivery:

Packing: waxing on the appearance of the trucks or nude packing.

Delievery: 20 days after receiving deposit

Payment term: 30% deposit, 70% balance payment delivery after receipt.

Shipping: usually by RORO or BULK vessel,can also by 40FR container,some small trucks can be fitted into 20GP or 40HQ
container.Will give you the best case for transportation.