XFATM2E-CTGGG1-4MS / XFATM2E-CTGxu1-4MS 1X1 Single Socket RJ45 Jack
LPJ16611AFNL
1.10/100 Base-T LPJ16611AFNL LINK-PP
2.1X1 Tab-down Compatible XFATM2E-CTGGG1-4MS / XFATM2E-CTGxu1-4MS
3.Through hole RJ45 modular jack
4.21.25 mm length RJ45 Magjack
1 x 1 Port RJ45 Modular Jack , 100Base RJ 45 Modular Connector1x1Port 8P8C RJ45 Female Connector with 10/100 Base-T Transformer,
Green/Green LED,Tab Up,RoHS |
LINK-PP Part Number | LPJ16611AFNL |
Other Part Number | XFATM2E-CTGGG1-4MS / XFATM2E-CTGxu1-4MS |
Application-Lan | ETHERNET(NoN PoE) |
AutomDX | YES |
Bst Circuit | YES |
Configuration RX | T,C |
Configuration TX | T,C |
Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
Diodes | NO DIODES |
LED Option | Green/Green LEDS |
Latch | TAB UP |
Number of Ports | 1x1 |
PCB | FR4 |
PCB Mount Angle | SIDE ENTRY |
PCB Retaining Post | T POST |
Package Height (Inches) | 0.530 |
Package Height (mm) | 13.45 |
Package Length (Inches) | 0.837 |
Package Length (mm) | 21.25 |
Package Width (Inches) | 0.628 |
Package Width (mm) | 15.95 |
Pin Type | THT SOLDER |
RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
Search | YES |
Shield EMI Tabs | WITH |
Temperature | -40°C ~ 85°C |
Turns Ratio RX | 1CT:1CT |
Turns Ratio TX | 1CT:1CT |
Description:
1X1 RJ45 Magjack with/without leds, meeting IEEE 802.3u
1. Product Type
Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to
240°C,
Wave solder capable to
260°C, Wave solder capable to 265°C
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Green - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85
Applications:
Used for networking and communication equipments such as HUB, PC
card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem