|
[China]
Trade Verify
Address: No.2, taotiandi, Jiang gan District. Hangzhou Zhejiang,China.
Contact name:Wendy
Riqi ( Hangzhou ) Filter Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Polyester Air Slide Fabric For Cement Plant , Chemical Industry And
Metallurgy
Air slide Fabrics
In cement plant:
An Airslide belt is in the middle of a chute. Powder material will
come into the chute above Airslide belt. Material will flow to the
chute lower side as pneumatic blower down Airslide belt. That's why
we say Airslide belt can move powder material because of the wind
power. And then, the rest wind will go out from the top of the
chute. Through the moving, no parts moved except powder material.
So that it can spare more energy and maintain cost, etc.
fluidization silo:
Our Airslide canvas is installed on the surface of the silo bottom.
It is supplied for installation as aeration units on the sloped
conical bottoms of bins and silos to aid in the withdrawal of dry
relatively free-flowing material.
Each Airslide aeration unit package consists of 200mm open-type. Airslide conveyor units in lengths of 1.5 or 3m depend on the slope length of the conical storage area. Some spoke patterns are normally used with materials which have good fluidization characteristics. Others spoke patterns provide maximum aeration for difficult materials which can be fluidized.
Specifications:
| TYPE | MATERIAL | PLY | TENSILE STRENGTH | HEAT RESISTANCE ºC | THICKNESS | WEIGHT/m2 | MAX WIDTH | AIR RESISTANCE IN | ||
| WARP >N/mm | WEFT >N/mm | 2m3/m2/minH2O mm | ||||||||
| AP4-4 | 100%Polyester | 4 | 360 | 270 | 150 | 4 | 3200g | 2000mm | Type A;80-120 | |
| Type B:120-150 | ||||||||||
| Type C:150-200 | ||||||||||
| AP4-5 | 100%Polyester | 4 | 360 | 270 | 150 | 5 | 3600g | 2000mm | Type A;80-120 | |
| Type B:120-150 | ||||||||||
| Type C:150-200 | ||||||||||
| AP4-6 | 100%Polyester | 4 | 360 | 270 | 150 | 6 | 4000g | 2000mm | Type A;80-120 | |
| Type B:120-150 | ||||||||||
| Type C:150-200 | ||||||||||
| AP4-7 | 100%Polyester | 4 | 360 | 270 | 150 | 7 | 4400g | 2000mm | Type A;80-120 | |
| Type B:120-150 | ||||||||||
| Type C:150-200 | ||||||||||
| AP4-8 | 100%Polyester | 4 | 360 | 270 | 150 | 8 | 4800g | 2000mm | Type A;80-120 | |
| Type B:120-150 | ||||||||||
| Type C:150-200 | ||||||||||
| AC4-5 | 100%Cotton | 4 | 150 | 100 | 150 | 5 | 3800g | 2000mm | Type A;80-120 | |
| Type B:120-150 | ||||||||||
| Type C:150-200 | ||||||||||
Polyester Filament Air Slide Fabric For Cement Factory
The Polyester Filament Air Slide Fabric For Cement Factory consists
of polyester fiber as raw material, which is woven by heavy-duty
loom warp and weft thread,it is suitable for pneumatic
transportation of powdery materials such as cement and alumina. The
product is spread between the material and the air chamber, the
following is the gas chamber, the above is the material, under the
action of air pressure through the product, the material fluidized,
so as to achieve the purpose of transport. It is also suitable for
pneumatic conveying devices of other powder and granular materials.
Polyester Filament Air Slide Fabric For Cement Factory Advantage
No moisture absorption No caking
Resistant to rotting and decomposition
Complete unloading without residues
Consistent fluidization over the complete surface
Good resistance to abrasion
Low wear and therefore longer life
Low shrinkage even when used under hot and humid conditions.
