|
[China]
Trade Verify
Address: 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China
Contact name:Alice Du
Shenzhen Rion Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Precise tilt angle measure for bridge, biaxial angle sensor for bridge building inclination angle measure
▶ APPLICATION
★ Bridge & dam detection
★ Wind turbines angle measure
★ Engineering vehicles automatic leveling
★ Laser equipment position
★ Medical facilities angle control
▶ FEATURES
★ Single / dual axis inclination measurement
★ Measuring Range :±1～±60° optional
★ Size:L92×W48×H36mm
★ Wide voltage input: 9～36V
★ Wide temperature working: -40～+85℃
★ IP67 protection grade
★ High Resolution: 0.001°
★ Water-proof air-plug
★ Highly anti-vibration performance >2000g
★ Output mode CAN 2.0A are optional
▶ TECHNICAL DATA
| ACA616T&626T-C2 | CONDITIONS | PARAMETERS | UNIT | ||
| Measure range | ±10 | ±30 | ±60 | ° | |
| Measure axis | X/XY | X/XY | X/XY | AXIS | |
| Resolution | 0.001 | 0.001 | 0.001 | ° | |
| Measure accuracy | @25℃ | 0.003 | 0.01 | 0.02 | ° |
| Long term stability | 0.01 | 0.02 | 0.03 | ° | |
| Zero Temp. coefficient | -40~+85℃ | ±0.0004 | ±0.0004 | ±0.0004 | °/℃ |
| Sensitivity temp-coeffi | -40~+85℃ | ≤100 | ≤100 | ≤100 | ppm/℃ |
| Power on time | 0.5 | 0.5 | 0.5 | S | |
| Response time | 0.02 | 0.02 | 0.02 | S | |
| Interface type | CAN 2.0A | ||||
| EMC | According to EN61000 and GBT17626 | ||||
| MTBF | ≥50000 hours/times | ||||
| Insulation Resistance | ≥100MΩ | ||||
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) | ||||
| Anti-vibration | 10grms,10～1000Hz | ||||
| Protection grade | IP67 | ||||
| Cables | Standard configuration: 2m length, wear-resistant, wide temperature, shielded cable 5P * 5.7mm aviation connector | ||||
| Weight | 235g(without cable) | ||||
▶ GENERAL DESCRIPTION
ACA616T is a full-temperature compensated high-precision single /
dual-axis inclinometer developed by RION Technology on the basis of
high-precision inclination platform. Its good temperature stability
can be used in a wide temperature environment of -40 ~ 85℃ In
addition, the system has a built-in high-precision 24it A / D
converter, and through a 5-level conversion algorithm, it can
measure the tilt and pitch angle of the sensor output relative to
the horizontal plane. Output protocol CAN2.0A.
The characteristics of non-contact installation make this product have good system integration. Just fix the sensor on the surface of the measured object with a screwdriver, the attitude and inclination of the object can be automatically calculated. It has strong ability to withstand shock and vibration, and has a great competitive advantage among domestic counterparts. It is specifically aimed at the industrial fields that high-end users require.
