|
[China]
Trade Verify
Address: 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China
Contact name:Alice Du
Shenzhen Rion Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
▶ GENERAL DESCRIPTION
HCA526T-CAN2.0A is a high accuracy dual -axis inclinometer developed by RION company, inherit the stability of the SCA series, while the accuracy be effectively improved, and the temperature drift performance with much more excellence , in addition the system with built-in high-precision 16bit A / D differential converter, meanwhile through 5 filtering algorithm, which can measure the angle of sensor output relative to the horizontal tilt and pitch tilt. The output interface CAN 2.0A are optional.Because of Built in ADI company’s high precision digital temperature sensor that can correct the sensor temperature drift in accordance with the changes of the built-in temperature sensor(temperature output are optional), to ensure high repeatability of the product in the low-temperature and high-temperature environment. The output frequency response most up to 100Hz, for higher response frequency Division we can customize according to the user requests. The products are truly industrial-grade products, reliable performance, scalability. Suitable for a variety of harsh industrial control environment.
▶ FEATURES
★ Dual axis inclination measurement ★ Range ± 1 ～ ± 60 ° optional
★ Size: 90 × 50 × 34mm ★ DC 9 ～ 36V wide voltage input
★ Wide temperature operation -40 ～ + 85 ℃ ★ Resolution 0.001 °
★ IP67 protection level ★ High vibration resistance> 2000g
★ Waterproof aviation plug
▶ APPLICATION
★Satellite positioning Search ★Rail-mobile monitoring
★engineering mechanical measurement of dip angle ★oil-well drilling equipment
★Radar detection of vehicle platform ★Underground drill posture navigation
★Gun Barrel angle measurement in early shooting ★Based on the angle direction measurement ★Satellite communications vehicle posture detection ★Shield pipe jacking application
★Ship’s navigation posture measurement ★Geological equipment inclined monitoring
▶ TECHNICAL DATA
HCA516&526T-C2 | CONDITION | PARAMETERS | UNIT | ||
| Measure range | ±10 | ±30 | ±60 | ° | |
| Measure axis | XY | XY | XY | ||
| Resolution | 0.001 | 0.001 | 0.001 | ° | |
| Measure accuracy | @25℃ | 0.005 | 0.01 | 0.02 | ° |
| Long term stability | 0.01 | 0.02 | 0.05 | ° | |
| Zero Temp.coefficient | -40～85℃ | ±0.002 | ±0.002 | ±0.002 | °/℃ |
| Sensitivity temp. coefficient | -40～85℃ | ≤50 | ≤50 | ≤50 | ppm/℃ |
| Power on time | 0.5 | 0.5 | 0.5 | S | |
| Response time | 0.02 | 0.02 | 0.02 | s | |
| Output rate | 5Hz,15Hz,35Hz,50Hz can be set | ||||
| Output signal | CAN2.0A | ||||
| EMC | According to EN61000 and GBT17626 | ||||
| MTBF | ≥50000hours/times | ||||
| Insulation Resistance | ≥100MΩ | ||||
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) | ||||
| Anti-vibration | 10grms,10～1000Hz | ||||
| Protection grade | IP67 | ||||
| Cables | Standard configuration: 1m length, wear-resistant, wide temperature, shielded cable 4*0.4mm2 aviation connector | ||||
| Weight | 190g(without cable ) | ||||
*This parameter only list ± 10 °, ± 30 °, ± 60 ° series for reference. For other measurement ranges, please refer to the nearest neighbor parameter.
A: Usually we have stock for every type of products, if the product that you selected we have in stock, then we only need to re-test it before leaving the factory, so the delivery time is around 2~4 days; if we don’t have them in stock, then we need to arrange the production, the delivery time will be around 2 weeks. For the customer-oriented design products, our engineers will give the approximate delivery time according to the technical requirements.
A: we accept 40% prepayment in advance, and the balance 60% payment before the delivery. For the customer-oriented design product, the payment will be discussed together.
A: Our products have passed very strict tests before delivery, so it is very low probability to have quality problem. If our products have quality problem (not caused by man-made factors) in the warranty period, our factory will arrange the free repair. If the product can’t repair well, we will arrange to provide a new one. If the product is out of warranty time, we will provide the repair only charging the material cost.
