Home Companies Shenzhen Rion Technology Co., Ltd.

High Reliable CE 3 Axis MEMS Gyroscope Sensor CAN Output Industry Grade

Shenzhen Rion Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China

Contact name:Alice Du

Inquir Now

Shenzhen Rion Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

High Reliable CE 3 Axis MEMS Gyroscope Sensor CAN Output Industry Grade

Country/Region china
City & Province shenzhen
Categories Measuring & Analysing Instrument Design Services
InquireNow

Product Details

AVG Vehicle Using high reliable Industry Grade MEMS CAN Type Angular Gyro Sensor

 

Reborn , Core upgrade

* Small drift,
* Stable performance
* Anti-interference
* Anti vibration

 

 

 

▶ GENERAL DESCRIPTION
 

TL740D is RION-TECH newly developed horizontal azimuth angular gyro sensor based on latest MEMS inertial measurement platform , by means of the dynamic attitude algorithm for the angular velocity of gyroscope ,it can simultaneously output carrier’s azimuth angle .The product inernal integrated RION’s Patent Inertial navigation algorithm, through the model of attitude angle data fusion , can solve the gyro short time drift problem as much as possible . This product is specially used for robot car, AVG vehicle azimuth orientation, attitude control and other related applications of the UAV, instead of the traditional robot vehicle magnetic bar guide shortcomings, no need at the site layout of magnetic stripe, is the necessary navigation components for the next generation of robot vehicle automatic tracing and driving.

 

KEY FEATURES
 
● Azimuth angle output          ●Strong vibration resistance             ●Light weight ●Long life,strong stability        ●Cost-effective                         ●All solid state ●Compact & light design        ●RS232/RS485 output optional         ●DC9~36V power supply




▶ APPLICATION

●AGV truck                  ●Car Navigation                ●3D virtual reality ●Platform stability            ● Auto safety system           ●UAV / Robot ●Turck-mounted satellite antenna equipment                 ●Industrial control  

              

Title goes here.

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine.

Parameters
                                                                                        TL740D
Mesuring range
Azimuth Angle (±180)
Acquisition bandwidth (Hz)
>100
Resolution(°)
0.01
Azimuth accuracy (°/min)
<0.1
Nonlinear
0.1% of FS
Max angle rate (°/s)
≥150
Accelerometer range (g)
±4
Acceleroemter resultuion(g)
0.001
Acceleroemter accuracy(mg)
5
Starting time(s)
30(Static)
Input Voltage(V)
+9~36V
Current (mA)
60(12V)
Working Temp.(℃)
-40 ~ +85
Storage Temp(℃)
-40 ~ +85
Starting time(s)
5(Static)
Input Voltage(V)
+9~36V
Current (mA)
60(12V)
Working Temp.(℃)
-40 ~ +85
Storage Temp(℃)
-40 ~ +85
Vibration(g)
5g~10g
Impact(g)
200g pk,2ms,½sine
Working life
10 years
Output rate
5Hz,15Hz,25Hz,50Hz can set
Output signal
RS232 ,RS485 , CAN output 
MTBF
≥50000 hours /times
Insulation resistance
≥100 Megohm
Impact resistance
100g@11ms,3Times/Axis(half sinusoid)
Anti-vibration
10grms,10~1000Hz
Protecting
IP67
Connector
matched with 1m cable
Weight
152g(without cable)

 

 

Ordering information 
 
TL740D-232
RS232 output mode
TL740D-485
RS485 output mode

 

2. The installation of the instrument should be kept parallel to the surface of the measured object, and reduce the influence of the dynamic and acceleration on the angle meter. Incorrect installation will lead to measurement errors, with particular attention to "surface" and" line "

1)The mounting surface of the instrument fixing must be close, smooth and stable with the measured surface. If the mounting surface is not smooth, the angle error of angle measurement can be caused easily. See figure Pic.AB

2)The axis of the instrument must be parallel to the axis of measurement, and the two axis should not be included angle as far as possible , see figure Pic.CD

 

 

3. Do not shake violently during the use of the product, avoid violent vibration, away from the vibration source (if you can not avoid please install the shock absorber), so as not to affect the product measurement accuracy;

4. Try to avoid a sharp acceleration, arrest, sharp turn angular velocity greater than 300 DEG /s movement during use, so as not to affect the measurement precision of products.

5. After the switch is started, the angular gyro sensor needs to be static 20S, and the initial value of the measuring unit is restored, so as to ensure the measurement precision of the product. If there is no such operation, the product can also be used normally, but can not reach the normal precision standard .

 
Certifications
Our Factory

 

Pre-Sales Service

* Inquiry and consulting support. 

* Sample testing support. 

* View our Factory.

 

After-Sales Service

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.

Packing & Delivery
ackaging

Hot Products

Tilt Angle Measure Vibration Test Displacement Sensor for Wind Turbines PCA826T is a high-performanc...
Wind turbins tilt sensor vibration sensor displacement sensor ▶ MAIN FEATURES ★ Biaxial tilt angle ...
Analog Dual Axis MEMS clinometer Linearity Tilt Sensor For Dam GENERAL DESCRIPTION HCA510T/HCA520T-N ...
MCA410T 420T VOLTAGE OUTPUT INCLINOMETER.pdf SOLAR TRACKING ANGLE TILT SENSOR CHEAP TILT ANGLE ...
wind power inclination sensor, wind tower tilt sensor, precise wind turbines angle sensor​ ▶ ...
Precise tilt angle measure for bridge, biaxial angle sensor for bridge building inclination angle ...