WELLMARK PACKAGING CO.,LTD. |
Verified Suppliers
|
|
Desktop Gluing Machine / Manual Gluing Machine Used for Gluing the Cover Papers
Product Description
Roller immersion in the glue plate, when roller rotation, paper (or other material with smooth surface)feeding and coating at the same time, the glue evenly over the surface.The feeding speed could adjustment.
Technical Parameters
Model | Unit | WM-500A | WM-700A | WM-1000A |
Gluing side | Under Side | Under Side | Under Side | |
Max.gluing width | mm | 500 | 700 | 1000 |
Min.gluing thickness | g/m | 0-300 | 0-300 | 0-300 |
Paper thickness | g | 40-3000 | 40-3000 | 40-3000 |
Materials thickness | mm | 0.1-10 | 0.1-10 | 0.1-10 |
Speed | m/min | 28 | 28 | 28 |
Motor Power | w/v/hz | 120w 220v 60Hz | 120w 220v 60Hz | 370w 220v 60Hz |
Dimension | mm | 800*450*400 | 1030*450*400 | 1350*450*400 |
Package Dimension | mm | 860*390*430 | 1060*390*430 | 1360*390*510 |
Net Weight | kg | 50 | 60 | 80 |
Gross Weight | kg | 55 | 65 | 85 |
Glue choice | White latex(Polyethylene glue) | |||
Paper Feed | By hand | |||
Cleaning way | By hand | |||
Automatic degree | Semi-automatic |
Product Application
WM-700 is under side gluing machine, it is adopt stainless steel,
effective anti - glue corrosion. It is mainly used for the gluing
of different thickness of paper, paperboard, Special paper,
leather, EVA, Nonwoven fabric, Oxford cloth,Etc. Paper box, carton
box, Corrugated box, Leather case, note book making, EVA puzzle,
Instead of manual gluing, improve
the efficiency of work.The gluing machine is the special equipment
or paper products to do gluing, which is widely used in printing
and packaging, paper box, carton, book cover making and Fabric
sample volume producing industry.
1.1 Installation:
The machine must be placed on the level of the
face, not a serious tilt phenomenon, otherwise, will make the glue
to the end of the accumulation of glue out of the water tray
1.2 test machine:
(200V / 50Hz) Turn on the power switch (the
switch and the motor knob are in the same way) when the handle is
turned manually (clockwise) A motor board, the motor speed
control knob, the machine began to slow to fast rotation.
1.3 Adjustment:
A. The thickness of the adhesive layer adjustment: at
the same time rotating rubber layer thickness adjustment handle
(the handle left and right each one), so that with a rubber roller
before and after the move, and the gap between the roll changes,
Satisfied thickness of the adhesive layer. Then, tighten the screw
on the screw can be. Adhesive thickness adjustment range of 0.03 ~
0.10MM.
B. Adjustment of the platen roller: Loosen the star
handle on the handle (the left and right) of the platen roller to
rotate the nut under it, and move the platen roller up and down.
Which brought out the paper gap, pay attention: This gap should be
at least greater than the above mentioned thickness of the adhesive
layer. Otherwise it will make the paper roll with glue.
1.4. Disassembly of plastic disk:
The plastic frame structure for the
parallelogram mechanism, simply press the counterclockwise
direction gently pull the tray handle to the next limit can be
removed, remove the plastic plate, let go, the frame will
automatically reset, heavy Repeat the above procedures, can be
installed on the plastic.
Maintenance and repair
1. When using the motor speed control knob, only slowly rotate
until you are satisfied with the speed.
2. When the tray tray is reset, it must hold the glue tray to
handle the handle and let it slowly reset.
3. The relative movement point must always add lubricating oil.
4. After each class, you must clean the machine residual glue to
prevent corrosion of parts