Topland Oilfield Supplies Ltd |
|
Tong Torque & Tong Line Pull System Drilling Instruments CTT100 / CTT101
Tong torque system consists of tong torque load cell, tong torque
gauge (installed in the driller display), and hydraulic hose.
Load cell installed in the wire line of the power tong, when the
drill pipe screws, it will be the pulling force which is
proportional with the tightening torque on the wire line rope. This
pulling force act on hydraulic fluid through piston of load cell,
connect wire line to transmit on the bourdon tube of the gauge. The
bourdon tube moves, it makes the pointer through the movement, then
indicates the force of the power tong. Use power tong or casing
tongs, May not use load cells, connects wire line in power tong or
in casing tongs hydraulic pressure source directly.
Tong Line Pull System description of Drilling Instruments
The system Indicates make-up or breakout torque (in pounds of line pull) for tool joints, drill collars, and drill string components. This type of system is used in applications where there are more than on set of tongs being used with different handle lengths. A 6" fluid-filled gauge reads directly in pounds of line pull which works in conjunction with a load cell that is connected directly to the tong handle. To determine the actual torque being applied you multiply the gauge reading by the tong handle length in feet. The gauge comes complete with target pointer that the driller sets to a corresponding torque requirement. A large variety of systems are available with up to 30.000 pounds of single line pull.
Features
-Capacity ranges from 10.000 pounds to 30.000 pounds of line pull.
-Various of models available to work with all manual tongs.
-English, Metric and dual scale dial readings available. Customer
logo on dial available
-Operator adjustable target pointer that the driller sets to a
corresponding torque requirement
-Indicators make up or break out torque (in pounds of line pull)
for all oilfield tubular.
Tong Torque System description of Drilling Instruments
Tong Torque system indicators torque in foot pounds applied to each
joint when using power tongs to run oilfield tubular. These systems
are available for all makes and models of power tongs and come with
either compression or tension type load cells that provide an
accurate check of makeup torque for all oilfield tubular
Features
-English, Metric or dual scale dials are available
-Tension or compression load cells are available for all power
tongs.
-Systems designed and build for the rugged requirements of the oil
filled.
-Load cells are designed to ensure a long service life with minimum
maintenance.
-Wide variety of capacities available to suit all applications and
tong configurations
Tong Torque & Tong Line Pull System of Drilling Instruments:
Model | Features | |
CTP Series | Indicates make-up or breakout torque (in pounds of line pull) for all oilfield tubulars. | |
6" fluid filled gauge. | ||
Operator adjustable target pointer that the driller sets to a corresponding torque requirement. | ||
Models and variations of available to work with all manual tongs. | ||
Capacity ranges from 10,000 pounds to 30,000 pounds of line pull. | ||
CTT Series | Indicates torque in foot pounds applies to each joint when using power tongs to run oilfield tubulars. | |
Models available for all makes and models of power tongs. | ||
Tension or Compression style load cells available for use in all power tong configurations. | ||
Wide variety of capacities available to suit all applications and tong configurations. | ||
English, Metric or dual scale variations available. |
FAQ
1. Who are we?
Topland is an integrated supplier established in 2008. We are a
global group of oilfield supplies with excellent teams in more than
5 countries. such as UAE, Kuwait, Iran and Saudi Arabia. We cooperated with ADES, ECDE, EDC, SOCAR-AQS, PDL, SAKSON, ONGC etc.
2. How can we guarantee quality?
Always a double requirements and drawing checking before the
production;
Always final Inspection before shipment;
3.What can you buy from us?
Drilling rig equipment and the related spares for the oil and
natural gas industries. Like Rig Components, Drawworks Spare parts
and Mud Pump Spare parts, Hydraulic Disc Brake,Solids Control
Equipment, Drilling and Fishing Tools,Wellhead Control
Equipment,Drilling Accessories, Cementing Equipment and Tools etc.
4. Why should you choose us?
4-1. Professional & Efficient, Customer Focus, Win-win
Cooperation
4-2. Fast Quote, Competitive price & within shortest lead time
4-3. Complete Range of products, like spare parts which are interchangeable with most of the well-known OEM equipment.
4-4. Order tracking service
5. How is the packing?
All the packing will meet the strict export packing requirement, we surely know how important the beautiful and firm packaging to the goods.
6. What is your terms of payment?
A: Generally by T/T, 30% advance payment, the balance 70% payment should be paid before delivery. We support EXW, FOB, FCA, CFR, CIF, CIP, DAP, DDU and DDP INCO Terms.