Active Member
|
[China]
Address: 8-1011,Lane 5600, Chuansha Road, Pudong, Shanghai, China
Contact name:Zoe Zou
Topland Oilfield Supplies Ltd |
|
|
API 7K Tubular Handling ToolsType T/C/MP Oil Drilling Safety Lifting Clamps
Safety Clamp description of Tubular Handing Tools:
The Safety Clamp consists of individual links, flexibly hinged
together. Each link has a separate tapered slip which acts as a
gripping member, much like a tapered rotary slip, and each slip is
held in a retracted position on the taper by spring tension. When
the clamp is tightened, each small slip take a firm initial grip on
the surface of the pipe. Should the pipe start to fall, or should
load increase occur against the slips, the taper mounting causes
each slip to wedge tighter against the surface of the pipe to
increase the grip or lock the pipe against further movement.
Gripping pressure is always uniform around the pipe so there is
little danger of crushing thin-walled pipe or damaging the pipe
surface. And, since each link, complete with tapered slip, is
interchangeable as a unit, the Safety Clamp is readily adaptable to
virtually any diameter. Each link changes the effective gripping
diameter of the clamp one inch. All parts are made of alloy steel,
heat-treated for strength and gripping ability.
Tubular Handing Tools Safety Clamp Technical Parameter:
| Type /(Range) | P/N: | Qty | Weight Ibs. | MP Parts list | ||||||
| MP-S | Links | Grip | W/O | C/W | Index | P/N: | Description | Qty | Weight | |
| Dies | Case | Case | No. | Uint | Ibs. | |||||
| 2 7/8" - 4 1/8" | 3030 | 7 | 8 | 83 | 125 | 1 | 3335 | Link, Complete for MP-S only | AR | 9 |
| 4" - 5" | 3031 | 8 | 9 | 91 | 133 | 1 | 3319 | Link, Complete for MP-R, MP-M MP-L and MP-XL | AR | 8¾ |
| MP-R | 2 | 3306 | Link (with cotter pin for carrier) | 1 | 4¼ | |||||
| 4½" - 5 5/8" | 33011 | 7 | 8 | 81 | 123 | 3 | 3307 | Pin, for link (with cotter pin) | 1 | ¾ |
| 5½" - 7" | 3012 | 8 | 9 | 89 | 131 | 4 | 3325 | Carrier Assy, Die for MP-S only | 1 | 6¼ |
| 6¾" - 8¼" | 33013 | 9 | 10 | 97 | 139 | 4 | 3324 | Carrier Assy, Die for MP-R, MP-M, MP-L , and MP-XL only | 1 | 6 |
| 8" - 9¼" | 33014 | 10 | 11 | 105 | 147 | 5 | 3333 | Die, Grip (with cotter pin) for MP-S only | 1 | 1¼ |
| 9¼" - 10½" | 3015 | 11 | 12 | 113 | 155 | 5 | 3310 | Die, Grip (with cotter pin) for MP-R, MP-M,MP-L, and MP-XL only | 1 | 1 |
| MP-M | 6 | 3309 | Carrier, Die | 1 | 2½ | |||||
| 10½" - 11½" | 3016 | 12 | 13 | 121 | 163 | 7 | 3311 | SPRING | 1 | |
| 11½" - 12½" | 3017 | 13 | 14 | 129 | 171 | 8 | 5104-18 | Pin, Roll | 1 | |
| 12½" - 13 5/8" | 3018 | 14 | 15 | 137 | 179 | 9 | 51405-28 | Pin, Cotter | 1 | |
| 13 5/8" - 14¾" | 3019 | 15 | 16 | 145 | 187 | 10 | 3318 | Bars, Link side, pr | 1 | 2½ |
| 14¾" - 15 7/8" | 3300 | 16 | 17 | 153 | 195 | 11 | 3304 | Link, Latch for MP-S, MP-R, MP-M and MP-L | 1 | 7 |
| MP-L | 11 | 3321 | Link, Latch for MP-XL only | 1 | 14 | |||||
| 15 7/8" - 17" | 3301 | 17 | 18 | 173 | 215 | 12 | 3308 | Pin, Screw (with cotter pin) | 1 | ½ |
| 17" - 18½" | 33022 | 18 | 19 | 181 | 223 | 13 | 3315 | Bushing, Screw pin | 1 | ½ |
| 181/8" - 19 3/8" | 3303 | 19 | 20 | 189 | 231 | 14 | 1405-10 | Pin, Cotter (1 per link pin) | AR | |
| MP-XL | 15 | 3302 | Screw | 1 | 5½ | |||||
| 19 3/8" - 20 3/8" | 3302 | 19 | 20 | 196 | 280 | 16 | 2714 | Washer, Thrust | 1 | 1 |
| 20 3/8" - 21½" | 3025 | 20 | 21 | 204 | 288 | 17 | 3303 | Nut, Makeup | 1 | 3½ |
| 21" - 22 5/8 " | 33032 | 21 | 22 | 212 | 296 | 18 | 3305 | Handle (2 required for MP-S, MP-R and MP-M;4 required for MP-L and MP-XL | R | 4½ |
| 22 5/8" - 23 3/4" | 33033 | 22 | 23 | 220 | 304 | 19 | 3316 | Lug, Hold, down (2 required for MP-S, MP-R, and MP-M; 4 required for MP-L and MP-XL) | Opt | 5¾ |
| 23¾" - 24 7/8" | 3034 | 23 | 24 | 228 | 312 | 20 | 3317 | Eye, Lifting (2 required for MP-S, MP-R, and MP-M;4 required for MP-L and MP-XL) | ||
| 24 7/8" - 26" | 33035 | 24 | 25 | 236 | 320 | 21 | 3320 | Wrench | Opt | 4¾ |
| 26" - 27 1/8" | 3036 | 25 | 26 | 244 | 328 | 22 | 3331 | Case for MP-S, MP-R, MP-M and MP-L | 1 | 5 |
| 29 3/8" - 30½" | 33039 | 28 | 29 | 330 | 354 | 22 | 3334 | Case for MP-XL | 1 | 42 |
| Type | Hand Pipe Size | Qty. of Chain Links | Weight | |
| mm(in) | kg | 1b | ||
| WA- C | 88.9-117.5(3 1/2-4 5/8) | 7 | 20.9 | 46 |
| 114.3-142.9(4 1/2-5 5/8) | 8 | 25 | 55 | |
| 139.7-168.3(5 1/2-6 5/8) | 9 | 27.7 | 61 | |
| 165.1-193.7(6 1/2-7 5/8) | 10 | 29.1 | 64 | |
| 190.5-219.1(7 1/2-8 5/8) | 11 | 31.3 | 69 | |
| 215.9-244.5(8 1/2-9 5/8) | 12 | 32.7 | 72 | |
| 241.3-269.9(9 1/2-10 5/8) | 13 | 40 | 88 | |
| 266.7-295.3(10 1/2-11 5/8) | 14 | 41.8 | 92 | |
| 292.1-320.7(11 1/2-12 5/8) | 15 | 44 | 97 | |
| 317.5-346.1(12 1/2-13 5/8) | 16 | 46.3 | 102 | |
| 342.9-371.5(13 1/2-14 5/8) | 17 | 48.6 | 107 | |
| 368.3-396.9(14 1/2-15 5/8) | 18 | 50.9 | 112 | |
FAQ
1. Who are we?
Topland is an integrated supplier established in 2008. We are a
global group of oilfield supplies with excellent teams in more than
5 countries. such as UAE, Kuwait, Iran and Saudi Arabia. We cooperated with ADES, ECDE, EDC, SOCAR-AQS, PDL, SAKSON, ONGC
etc.
2. How can we guarantee quality?
Always a double requirements and drawing checking before the
production;
Always final Inspection before shipment;
3. What can you buy from us?
Drilling rig equipment and the related spares for the oil and
natural gas industries. Like Rig Components, Drawworks Spare parts
and Mud Pump Spare parts, Hydraulic Disc Brake,Solids Control
Equipment, Drilling and Fishing Tools,Wellhead Control
Equipment,Drilling Accessories, Cementing Equipment and Tools etc.
4. Why should you choose us?
4-1. Professional & Efficient, Customer Focus, Win-win
Cooperation
4-2. Fast Quote, Competitive price & within shortest lead time
4-3. Complete Range of products, like spare parts which are interchangeable with most of the well-known OEM equipment.
4-2. Order tracking service
5. How is the packing?
All the packing will meet the strict export packing requirement, we surely know how important the beautiful and firm packaging to the goods.
6. What is your terms of payment?
A: Generally by T/T, 30% advance payment, the balance 70% payment should be paid before delivery. We support EXW, FOB, FCA, CFR, CIF, CIP, DAP, DDU and DDP INCO Terms.
