Active Member
|
[China]
Address: No.159 Jiugan road Sijing industrial zone Songjiang District Shanghai, China
Contact name:Steve
Shanghai kangquan Valve Co. Ltd. |
|
|
Automatic Quick Release Air Valve , Double Ball 3" Air Escape Valve
Quick Release Air Valve Introduction
VALVE DOUBLE BALL 3"
FLAT FACE FLANGE AS PER ASME B16.5
BODY:A105 FORGING/A216 WCB CASTING^TRIM # 5 (FULL HARD FACED) AS
PER API 600/602^OTHER
SEPCS: ANGLE BODY, DISC TYPE, BOLTED BONNET, GRAPHITE STEM PACKING
PRESSURE RATING 125 LBS
Quick Release Air Valve Specifications:
| Part Material | |||||||
| NO. | PART NAME | Material | |||||
| 1 | Body & Bonnet | Ductile Iron | |||||
| 2 | Baffle | Ductile Iron | |||||
| 3 | Float Ball | Stainless Steel 304 | |||||
| 4 | Seal Ring | EPDM | |||||
| 5 | Air Release Valve | Assembly | |||||
| Technical Specification | ||||
| Nominal Pressure: 1.0,1.6MPa | ||||
| DN: 50~200mm | ||||
| Medium: Water | ||||
| Work temperature: ≤120℃ | ||||
| Design Standard : BS5163 | ||||
| Flange Standard : BS EN 1092 | ||||
| OTHER STANDARD ARE AVAILABLE UPON REQUEST. |
Flanged end deminsion: according as ISO7005.2 PN16/PN10
| working pressure: 1.0MPa/ 1.6Mpa | |||||
| seal test: 1.1MPa /1.76Mpa | |||||
| strength test: 1.5MPa / 2.4Mpa |
| 1, body/bonnet: cast iron/ ductile iron | |||||
| 2, floating ball: SS304 / PTFE | |||||
| 3, vent: steel, 59# brass | |||||
| 4, seal ring: EPDM | |||||
| 5, bolt/nut: A3 |
Standard ; DIN BS ANSI
Working Pressure : PN10 PN16 PN25
Material
: Cast Iron and Ductile Iron
1 ) Size: 1-1/2" to 12"
2 ) Class: PN10, PN16.125LB, 150LB
3
) Type: NBR Floating Ball, Stainless steel /
Brass Spindle
4
) Material: CAST IRON, DUCTILE IRON
All our products are designed and manufactured strictly in conformity with the standard of API, ANSI,
AWWA, JIS, BS and DIN, etc. Most of our manufacturers have obtained ISO 9001, API 6D, TUV and
CE certificates to ensure the quality stability of the products. We provide EN10204 3.1B. Mill Test
Certificate for all our supplied products.
Description:
The air release valves will be installed at sections of the pipeline |
|
flanged base for connection to a valve stem that connects the air valve to the main pipeline. |
The bore
leading to the flange base shall be in accordance to the size of the main pipeline and the |
|
Competitive Advantage:
DESIGN STANDARDS
•
Coating Powder Epoxy Min. 250 micron
• Three Way Functioning:
-
Release of large volumes of air during pipeline fill.
-
Allows in flows of large volumes of air when pipe is emptied.
- Release of air under pressure
• Low Maintenance
•
Working pressure Min. 0.1 bar Max. 16 bar
•
Hydraulic test performed under 1.5xPN pressure
Install:
REMARKS & APPLICATIONS
•
For water (Not sewage) and neutral liquids.
•
Nominal Pressure: PN 16/25 & PN 25/40
• Working Temperature: -10˚C to 120˚C
