Iron coating EPDM or NBR Resilient seated Gate Valve PN16 600mm

DI D/F Gate Valves Resilient seated PN16 600mm By Stock Ready 

APPLICABLE STANDARDS

⊙ American Standard

Design to ANSI/AWWA C509

Face to face dimension to ASME B16.10-2000(ISO 3 series)

Flange and drilling To SME/ANSI B16.42-1998

⊙ British Standard

Design to BS5163,BS5150

Face to face dimension to BS5163(ISO 3series,ISO19 series)

Flange and drilling To BS4504 part1(EN1092)

⊙ Germany Standard

Design to DIN3352

Face to face dimension to DIN3202(F4:ISO 14 series;F5: ISO 15 series)

Flange and drilling to BS EN1092

Applications: This valve widely applied in the liquid pipes for opening or closing fixing in such water,

sewage disposal, electric power, energetics pipe , chemical, shipping, energy sources etc.

for BS 5163 A, the max size is DN800, PN16

for DIN F4, max size is DN1,000,  PN16

Specifications:

FEATURES 

⊙ Shot-blasting 

protective surface finished by shot-blasting and the surface is smooth and neatness. 

⊙ Flatting seat 

Smooth continuous bore way without seating recess, it is not easy to get impurity pilled up. 

Making the liquid straightway. 

⊙ Treating with rubber 

Both inner and outer are coated with advanced knowledge of rubber vulcanization then making 

sure of the elasticity of rubber ,and make sure the exact geometry dimension. Rubber and ductile

 cast iron valve hand together hardly. This can avoid fall-off due to long-term use. 

⊙ Anti- corrosion 

Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of 

Corrosion resisting and raise the quality of 

water supply. 

⊙ Ruggedization 

The older ductile iron valve is easy to rupture after being impacted by nonego. It can stop 

rupture depend on the good mechanics capability of ductile iron . 

⊙ Three “○” sealed ring 

With the three “O” – rings, the leakage can be greatly reduced and the “O” – ring can be 

replaced under this condition with pressure and without stopping water. The thrust axletree 

reduces the frictional resistance and lowers the operational torque. And it can be switch seal 

ring without opening and closing. 

⊙ Rigid round body 

The body is founded minutely, the rigid geometry size ensure inner sealing of valve without any

 process. 

⊙ Light weight 

This body is made of ductile iron, it is 20%-30% lighter than the olds. Easily to fixing and 

servicing.