Stainless Steel 30t/H 15kw Heavy Duty Lamella Pumps

Model Is SR-YPB15A-1 Rendering Material Pump Material Transfer Pump 

1. GM PVC material transfer PAC pump diaphragm metering pump chemical dosing pump is compact structure, no leakage, safe operation and easy to maintain.

2. The flow can be adjusted by controling the speed regulating handwheel. And the multi-layer composite structure diaphragm has longer service life.

3. Medium can be corrosive and high viscosity, and should be without solid and with viscosity range of 0.3~800 mm2/s.

4. The chemical dosing pump is widely used in petroleum, chemical industry, spinning, food industry, papermaking, atomic energy, power plants, plastics, pharmacy, water works, environmental protection or other industries.

5. PTFE, PVC, SS304, SS316 materials pump bodies could be chosen to transfer liquids for all kinds of applications.

Design Features

Material Corrosion-resistant materials.The raw material transfer pump produced by Jiangsu Senrong is used for the transportation of raw materials after crushing. It is specially designed for large-particle, high-viscosity biological materials. It is mainly used for whole raw fish, cooked fish, fish gills, slaughterhouse internal organs, The transport of materials such as poultry viscera and broken animal carcasses.

The raw material transfer pump is a positive volume pump. During the operation, the volume of the transfer chamber changes with the change of the blade, so that the material works between the feed and the discharge, and the discharged material is transported by pipeline to avoid contact with the outside. The blade and the conveying cavity are made of special wear-resistant materials, which ensure the reliability of use and replaceable design, which improves the convenience of later maintenance.

The mixed flow pump is a "pull-out" structure pump. When inspecting and disassembling the impeller and shaft seal, it is not necessary to disassemble the pipeline connected to the pump body. It is equipped with a precision-machined pump shaft and a bearing lubricated with thin oil, and a protective sleeve is installed in the stuffing box cover. The oil level of the bearing box can be controlled by a constant oil cup. The feet of the pump body can bear any load from the pipeline and transmit it directly to the foundation. In this way, the rotor will not bend because the pump is under load, thus ensuring the best service life of the bearing. Due to the larger flow area, thereby reducing blockage. The direction of rotation of the pump, viewed from the drive end, is clockwise. The power drive can be an electric motor or an internal combustion engine. The pump device can be equipped with a complete air release device, which is conducive to the exhaust of the suction pipeline. Shaft seal Packing seal or double mechanical seal.

Material Corrosion-resistant materials.