Shenzhen Reiss Optoelectronics Technology Co., Ltd. |
|
P2.5 High Brightness Flexible Module Large Indoor LED TV Wall Screen
Flexible LED screen main features
1.The installation of the flexible LED display can be any curved
surface, suitable for artistic modeling.
2.Suitable for surface display of stage backgrounds, exhibition
halls, indoor conference rooms, etc.
3.The installation of the flexible LED display completes the
on-site installation structure, adopts a strong magnetic adsorption
device, direct adsorption, convenient installation and convenient
maintenance. Both safety and stability are high.
4.The PCB is made of flexible soft board, and the mask and the
bottom case are made of rubber.
5.The connection between the modules uses a high-end connector -
HDMI connector.
6.More reliable and stable with distributed scanning and modular
design.
7.High gray level and high refresh rate design: the gray level can
be 10-16bit, and the refresh frequency can be 400-1500Hz, so that
the LED display screen has no delay and smear phenomenon.
Process requirements
1.Made of high quality silica gel to make the bottom case,
immersion gold PCB soft PCB, can be spliced 16:9, standard size,
module magnet adsorption installation, power box front end
maintenance design, special scene, before installation, special
tools can be satisfied before maintenance.
2.Full range of 320*160 mm, standard size design, low current, low
heat, high contrast, high brightness and high gray, refresh 1920Hz,
true 16bit gray level.
3.With SMD1515 pure black light, the black screen is completely
consistent with the whole screen. The pixel matches
1920*1152/3840*2304, 2K/4K resolution, and plays HD video to
achieve the perfect playback effect.
4.The use of Shengyi TG (170 ° C) immersion gold S1000-2 base
material, using 0.35 thickness immersion gold process, to ensure
that the PCB board is not short-circuit flexible, high-order
materials greatly reduce the "color temperature" phenomenon.
5.The bottom shell and the back shell of the PCB are made of
high-quality silica gel material combined with copper pillar
welding and adhesive iron seat lock screws, which greatly solves
the problem of no debonding and non-warping angle, and effectively
improves the flatness and use effect of the screen body.