Coldextruded Recycling PE PP Plastic Pelletizing Machine 3kw-7.5kw

Coldextruded Recycling PE PP Plastic Pelletizing Machine 3kw-7.5kw

JIUXIN compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing to one step. Applied in the plastics recycling and pelletizing process. Our system is a reliable and efficient solution for plastics films, raffias, filaments, bags, woven bags and foaming materials re-pelletizing.

Final productions produced by compacting and pelletizing system are in the form of pellets/granules, can directly put into the production line for film blowing, pipe extrusion and plastics injection, etc.

Feeding:

As standard design, plastic scraps such as film, filament, raffias conveyed into the compacting room through belt conveyor; to handle rolls’ scraps, roll hauling off device is an optional feeding method.

Motor drives of conveyor belt and hauling device cooperate with ABB inverter. Feeding speed of conveyor belt or roll hauling off is fully automatic based on how full the compactor’s room is. Metal detector can be combined with belt conveyor, and can interlock with control system, to warn and stop the system, in case that metal is found in feeding section.

Features:

1.The PE PP Plastic Pelletizing Machine does not need preheating during operation. It can be used immediately after startup.The operation is simple,it only needs to lead the raw material into the feed inlet.

2,The PE PP Plastic Pelletizing Machine is space saving and low energy consumption.It soften the materials by simply rotating a single screw, extruding the die head,and cut out the same particles as the raw material.

3.The PE PP Plastic Pelletizing Machine does not heat, neither change the molecular structure of the material during production.The usage rate is very high,and the output can reach to 60-120Kg/h.

4.The PE PP Plastic Pelletizing Machine is smoke free and dust-free, with extremely low noise and environmental protection.

Working Principle:

1,Working with the film making machine:

During the processing of film,the scraps sent out by the film making machine will be transferred to the transaction mechanism of the granulator immediately.The extrusion mechanism partially melts the scraps and extrudes them to the mold.The granulation mechanism cuts them into average particles,which are then inhaled by the feeding cooling mechanism and sent to the cooling pipe.Finally,they are sent to the customer collection device to complete the recycling procedure.