Active Member
|
[China]
Address: DONGXING VILLAGE,YANJIANG ROAD,LEYU TOWN,ZHANGJIAGANG CITY,JIANGSU215600,CHINA
Contact name:Bonnie Wang
Suzhou Beakeland Machinery Co., Ltd. |
|
|
500 - 2000 Kg / H PP PE HDPE LDPE Plastic Film Recycling Machine
Function:
Plastic Film Recycling Machine is the ideal solution for your plastic film recycling needs. This fully automated washing line takes plastic PP / PE films (polypropylene and polyethylene films) and turns them into clean, contaminant-free film pieces that can be used to produce high-quality PP / PE granules in the pelletizing process. The pellets produced can then be used to manufacture new plastic products.
To fully wash dirty or soiled PP / PE film, a series of recycling machinery must be used in a specific order. Our standard, high-efficiency PE film washing line offers the most effective way to clean plastic films and ranges from an input capacity of 500kg/h upwards to 3,000kg/h.
The output capacity is dependant on the volume of contamination within the PE films you’re recycling. While our standard PE film washing line is sufficient for most facilities, custom setups with additional machinery and increased capacity can be designed for your specific needs.
Main components of Plastic Film Recycling Machine
| No. | Machine name | Function |
| 1 | Belt conveyor | For waste material feeding automatically. |
| 2 | Shredder | For material size reduction. Single shaft shredder & Double shaft shredder could be all choosed as per different plant's needs. |
| 3 | Crusher/Granulator | Wet crushing system.It used for material size reduction and pre-washing. |
| 4 | Low speed friction washer | For material conveying to next washing steps. 720rpm rotating speed could pre-washing the material with a good effect. |
| 5 | Screw loader | For material conveying to next stage. |
| 6 | Sink & Float separation tank | for impurities precipitating separation and wash the material more clean. |
| 7 | High speed Friction washer( Scrub washing machine) | It could achieve a good cleaning effects through the blades on the beating and spray. This machine is suitable for broken film and Plastic flakes washing.
|
| 8 | Dewatering machine(Centrifugal dryer) | This machine is mainly used for the cleaning of waste plastic after mechanical dewatering and drying, the spindle through high speed rotating threw the plastic and water to the screen, water releases by screen, while the plastic is from the outlet to be out of the machine enters into the next procedure. The machine has a good drying effect and high energy efficiency. The blade is made of high wear-resistant materials, can be replaced more conveniently. |
| 9 | Hot air drying system | For further material drying and transportation to final packing system |
| 10 | Film Squeezer dryer | Replace the traditional centrifugal dryer above.It could turn washed film to granulas pieces directly which could increase pelletizing capacity further. |
| 11 | Storage silo | For material storage and packing |
| 12 | Electrical control cabinet | Electrical parts brand customized. |
Technical parameter of Plastic Film Recycling Machine
For soft PP / PE:
| Model | BKL-FS300 | BKL-FS500 | BKL-FS1000 | BKL-FS2000 |
| Capacity (KG/H) | 200-300 | 400-600 | 800-1000 | 1800-2000 |
| Water consumption(T/H) | 2--3 | 3--4 | 4--6 | 6--8 |
| Power Consumption(/H) | 110--160 | 160-230 | 280-450 | 550-800 |
| Staff(person) | 2-3 | 2-3 | 4-6 | 6-10 |
| Factory Area (M2) | 350 | 450 | 500 | 1000 |
| Final moisture(%) | 5-10 | 5-10 | 5-10 | 5-10 |
| Final particle size(mm) | 60-100mm | 60-100mm | 60-100mm | 60-100mm |
Product features of Plastic Film Recycling Machine
| 1 | High working efficiency, less energy consumption; high automation, less power. |
| 2 | Long life, machine material is SUS304 stainless steel. |
| 3 | Wet crusher. Crush the plastic with water. SKD-11 blade material. |
| 4 | By multiple friction washing, rinsing washing and hot washing, the dirty such oil contamination and mud can be washed out fully. |
| 5 | Reasonable flowchart design for convenient operation and lower maintenance cost. |
| 6 | Good drying result. Final plastic moisture is less than 3%. |
Detailed Photos
