|
[China]
Trade Verify
Address: Shengang Metropolitan Plaza, Xinwu District, Wuxi, China
Contact name:Ruth
Wuxi Wondery Industry Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
AC220V 50HZ Radiator Core Builder With Reliable Working Performance
Application:
The radiator core builder machine assembles together the flat tubes, fins, headers, and side plates, and assemble
them into a radiator core.
Technical Parameters of Radiator Core Builder Machine
| Core dimension | Core height direction | 350-780mm |
| Core width direction | 200-680mm | |
| Flat Tube Layers | 1 layer/2layers | |
| Tube Laying Mode | Manual | |
| Flat Tube Flaring Mode | Automatic /Manual | |
| Fin Laying Mode | By fin tray /Manual | |
| Production Capacity | Around 20-25sets/hour | |
| Drive mode | Servo /Pneumatic | |
| Overall Dimension | 2100*1800*1200mm | |
| Weight | 2200kg | |
Main features:
The radiator core builder machine is used for assembling heater radiator cores. The radiator core builder machine has
the advantages of stable and reliable working performance, easy operation, low noise, accurate positioning of flat
tube center, and even distribution of fins. The assembled radiator core has a high assembling
accuracy and a good appearance, which ensures a better brazing effect in the brazing furnace.
Working Flow
| Radiator Core Assembly Machine Operation Steps | ||||||
| Step | Machine Movement | Manual Operation | Manual | Auto | Material Needed | |
| comb teeth up | comb teeth cylinder works | Press WORK button | ● | — | ||
| place front side plate | — | take side plate and place it | ● | side plate/1 piece | ||
| Tube distribution block forward | tube distribution cylinder works | Press WORK button | ● | — | ||
| place flat tubes | — | take and place flat tubes | ● | ● | flat tubes | |
| flat tube alignment forward | alignment cylinder works | Press WORK button | ● | — | ||
| tube distribution block backward | tube distribution cylinder backward | Press WORK button | ● | — | ||
| place fins | — | take fins and place them between the tubes | ● | fins | ||
| comb teeth Tight | comb teeth cylinder backward | Press WORK button | ● | — | ||
| place back side plate | — | take side plate and place it | ● | side plate/1 piece | ||
| core body pre-compression | compressing cylinder works | Press WORK button | ● | — | ||
| core body surface eveling | — | eveling core body | ● | leveling tool | ||
| comb teeth down | comb teeth cylinder backward | Press WORK button | ● | — | ||
| core body compression | compressing cylinder works | Press WORK button | ● | — | ||
| Right pushing cylinder forward | Right pushing cylinder works | Press WORK button | ● | — | ||
| install left header | — | take and place the header, and assemble it with the flat tubes manually | ● | header/1 piece | ||
| Left pushing cylinder forward | Left pushing cylinder works | Press WORK button | ● | — | ||
| Right pushing cylinder backward | Right pushing cylinder works | Press WORK button | ● | — | ||
| install right header | — | take and place the header, and assemble it with the flat tubes manually | ● | header/1 piece | ||
| Right pushing cylinder forward | Right pushing cylinder works | Press WORK button | ● | — | ||
| Both right and left pushing cylinder backward | Right and left pushing cylinder works | Press WORK button | ● | — | ||
| place brazing fixture | — | take and place the brazing fixture | ● | brazing fixture | ||
| compressing cylinder backward | compressing cylinder backward | — | ||||
| take out ready core, and start next cycle | — | take out ready core | ● | — | ||
Picture of Semi Automatic Radiator Core Builder Machine with Tube Distribution Silo
