Active Member
|
[China]
Address: No.8, Biyun Rd, Fuqiao Town, Taicang City, Jiangsu Province, China
Contact name:Peter W
Taicang Global Machinery Co., Ltd. |
|
|
OD External Scarfing Tool For Steel Pipe Making
External Scarfing Inserts Tools for High Frequency Welding Pipe
making:
Application:
Exterior scarfing inserts for tube machining
Deburring interior scarfing inserts: deburring the tubes to obtain
the best results of the final products
Workpiece material: steel, stainless, cast iron etc.
Coating: PVD/CVD
Standard Specification and machining range :
| External Scarfing Inserts-Six Edges | ||||||
| ITEM CODE | φI.C | S | a° | φd | Machining Range | |
| (mm) (inch) | ||||||
| H-R9.0 (DET-3) | 25 | 4.76 | 18 | 5.1 | 9-15 | 5/8'' |
| H-R13 (DET-5) | 25 | 4.76 | 18 | 5.1 | 15-23 | 5/8''-7/8'' |
| H-R17 (DET-7) | 25 | 4.76 | 18 | 5.1 | 23-32 | 7/8''-1.1/4'' |
| H-R21 (DET-8) | 25 | 4.76 | 18 | 5.1 | 32-41 | 1.1/4''-1.5/8'' |
| H-R28 (DET-9) | 25 | 4.76 | 18 | 5.1 | 41-51 | 1.5/8''-2'' |
| H-R38 (DET-10) | 25 | 4.76 | 18 | 5.1 | 51-73 | 2''-2.7/8'' |
| H-R48 (DET-11) | 25 | 4.76 | 18 | 5.1 | 73-92 | 2.7/8''-3.5/8'' |
| H-R60 (DET-12) | 25 | 4.76 | 18 | 5.1 | 92-118 | 3.5/8''-4.5/8'' |
| External Scarfing Inserts-Four Edges | ||||||
| ITEM CODE | Cutting Edge | S | φd | R | Machining Range | |
| Length(mm) | (mm) | |||||
| SPUB-63A | 19 | 4.76 | 5.1 | 9 | ≤18 | |
| SPUB-63B | 19 | 4.76 | 5.1 | 13 | ≤23 | |
| SPUB-63C | 19 | 4.76 | 5.1 | 15 | ≤30 | |
| SPUB-63D | 19 | 4.76 | 5.1 | 20 | ≤38 | |
| SPUB-63E | 19 | 4.76 | 5.1 | 25 | ≤48 | |
| SPUB-63F | 19 | 4.76 | 5.1 | 33 | ≤62 | |
| SPUB-63G | 19 | 4.76 | 5.1 | 45 | ≤86 | |
| SPUB-63H | 19 | 4.76 | 5.1 | 55 | ≤106 | |
| SPUB-63I | 19 | 4.76 | 5.1 | 65 | ≤126 | |
| SPUB-63G | 22 | 4.76 | 5.1 | 45 | ≤80 | |
| SPUB-63H | 22 | 4.76 | 5.1 | 50 | ≤90 | |
| SPUB-63I | 22 | 4.76 | 5.1 | 60 | ≤110 | |
| SPUB-63J | 22 | 4.76 | 5.1 | 75 | ≤140 | |
| SPUB-63K | 22 | 4.76 | 5.1 | 85 | ≤160 | |
| SPUB-63L | 22 | 4.76 | 5.1 | 100 | ≤190 | |
| SPUB-63M | 19 | 4.76 | 5.1 | 0 | ANY | |
| SNMX1507 OD Scarfing Inserts | ||||||
| ITEM CODE | Cutting Edge | S | d | R | Machining Range | |
| Length(mm) | (mm) | |||||
| SNMX1507-R15 | 15.9 | 8 | 5.1 | 15 | 15-20 | |
| SNMX1507-R20 | 15.9 | 8 | 5.1 | 20 | 20-25 | |
| SNMX1507-R25 | 15.9 | 8 | 5.1 | 25 | 25-30 | |
| SNMX1507-R30 | 15.9 | 8 | 5.1 | 30 | 30-35 | |
| SNMX1507-R35 | 15.9 | 8 | 5.1 | 35 | 35-40 | |
| SNMX1507-R40 | 15.9 | 8 | 5.1 | 40 | 40-50 | |
| SNMX1507-R50 | 15.9 | 8 | 5.1 | 50 | 50-60 | |
| SNMX1507-R60 | 15.9 | 8 | 5.1 | 60 | 60-90 | |
| SNMX1507-R70 | 15.9 | 8 | 5.1 | 70 | 90-110 | |
| SNMX1507-R80 | 15.9 | 8 | 5.1 | 80 | 110-130 | |
| SNMX1507-R100 | 15.9 | 8 | 5.1 | 100 | 130-170 | |
