Dynamic Corporation Limited |
Verified Suppliers
|
|
DCL-Ex05E~60E parameters.pdf
Explosion Proof Electric Actuator, IP68 NEMA 4X modulating type
Features
Specification:
Type | Ex05E | Ex10E | Ex20E | Ex40E | Ex60E |
Power | AC110V/AC220V | ||||
Output Torque | 50Nm | 100Nm | 200Nm | 400Nm | 600Nm |
Acting Time | 20S | 30S | 30S | 30S | 45S |
Turning Angle | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° |
Motor Power | 10W | 25W | 40W | 90W | 90W |
Rated Current | 0.24/0.15A | 0.57/0.30A | 0.63/0.35A | 1.12/0.64A | 1.18/0.67A |
Total Weight | 3.0kg | 5.0kg | 5.5kg | 9.5kg | 10.0kg |
Input Signal | 4-20mADC,1-5VDC,2-10VDC | ||||
Output Singal | 4-20mADC | ||||
Basic Error | not more than ±1% | ||||
Reciprocating Error | not more than 1% | ||||
Dead Space | 0.5%-5.0% adjustable | ||||
Damping Characteristic | 0 times | ||||
Repeating Error in Actuator | ≤1% | ||||
Insulating Resistance | 100MΩ/500VDC | ||||
Withstand Voltage Class | 1500VAC 1minutes | ||||
Protection Class | IP67 | ||||
Explosive-proof grade | Exd II BT4Gb | ||||
Installation Angle | 360°at any angle | ||||
Electric Interface | 2-M20*1.5 explosion-proof plug,clients should install corresponding explosion-proof cable connector when using according to the cable selected. | ||||
Ambient Temperature | -20℃~+60℃ | ||||
Optional Function | Over-torque protector/Dehumidify Heater/Passive contact switch | ||||
Remark | Any other input or output signal needed, please specified in purchase order. |