Dynamic Corporation Limited |
Verified Suppliers
|
|
15S/18Nm Quarter Turn Actuator Subminiature Electric Actuator
Features
Description
DCL common series electric actuator are typically used to drive quarter turn butterfly valves, ball valves, dampers and swinging arms. On receipt of a continuous power signal, the motor runs one direction and via an all metal gear box with last stage worm gear train rotates the output drive 90°. The motor is automatically stopped by internal cams striking limit switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the output drive position.
Over torque protector is optional only if accurate output torque is needed. PTC electronic heating component is also used as thermostatically controlled anti-condensation heater that will protect actuator against damage from condensation.
Performance Parameters | |||||
Type | DCL-02 | DCL-MZZ(Multiple turns) | |||
Power | DC24V | AC24V | AC110V | AC220V | DC24V |
Motor Power | 8W | 6W | 6W | 6W | 20W |
Rated Current | 0.7A | 1.3A | 0.3A | 0.15A | 1.1A |
Standard Time/Torque | 15S/18Nm | 18Nm | |||
Optional Time/Torque | 7S/9Nm 60S/18Nm | ||||
Turning Angle or turns | 0~900 | 3r/min | |||
Available Control Circuit | Type G | Type of A,B | Type of A,B ,E , | ||
Total Weight | 1.2kg | ||||
Insulating Resistance | 100MΩ/250VDC | 100MΩ/500VDC | 100MΩ/250VDC | ||
Withstand Voltage Class | 500VAC 1 minute | 1500VAC 1 minute | 500VAC 1minute | ||
Protection Class | IP67 | ||||
Installation Angle | 3600 at any angle | ||||
Electric Interface | 7-core cable for connection | ||||
Ambient Temperature | -25~+55℃ | ||||
Fuse | 2A | 3A | 1A | 1A | 2A |