Arista XVR-10167-20 QSFP-100G-SWDM4 Compatible LC MMF 100M QSFP28
module
SWDM4 is four short wavelength division multiplex, as the
latest new solution to provide seamless
migration for 10G Infrastructure into 40G and 100G Ethernet.
The SWDM4 mux/demux four short wavelength region optical lane
(850nm, 880nm, 910nm, 940nm) and couple into the duplex MMF via LC
connector. The 100G SWDM4 optics serves as the lowest total
link cost for enterprise and small cloud data centers.
Top-Trans QSFP28 100G Module is designed for
100GBASE archictecture. This QSFP28 SWDM4 module uses SWDM
VCSEL transmitter and PIN receiver to create the 100Gigabit
connection via the fiber link over up to 70M in OM3 MMF,
100M in OM4 MMF, 150M in OM5 MMF. This QSFP28 module features the
LC duplex connector which can interoperate
with other QSFP28 SWDM4 optics. This QSFP28 module is fully
MSA compliant and features the online DOM/DDM to monitor the
operation status. This QSFP28 module can be programmed with
the compatibility to interoperate with Arista Network QSFP28
ports.
Hot-pluggable QSFP28 form factor
Supports 103.1Gb/s aggregate bitrate
Power dissipation < 3.5W
RoHS-6 compliant
Commercial case temperature range of 0°C to 70°C
Single 3.3V power supply
Maximum link length of 100m on OM4 Duplex Multimode Fiber (MMF)
Can I use your QSFP28 module with Arista original
QSFP-100G-SWDM4 optics?
Yes, It can interoperate with
Arista optics
What's your optic warranty terms?
1 year free replace, 3 years
free repairment for non-human made hardware defects
What if I find your optics are not satifiying with our fiber link,
occurs critical signal losses?
Our optics is produced using fresh new components through the
strict QC control over parameter and performance test
through error detector and eye diagram. The qualification
ratio is over 99.9%. If any quality defects happen within the warranty, we will arrange
the replace/repair service immediately