Home Companies TOPSTAR TECHNOLOGY INDUSTRIAL CO., LIMITED

InnoLight TR-FC13R-N00 QSFP28 100G QSFP28 LR4 Ethernet Optical Transceiver

Contact Us

[China]

Trade Verify

Address: 28 Yayuan Road,Wuhe Community,BanTian Street,Longkong District, Shenzhen,China.

Contact name:Vicky Tian

TOPSTAR TECHNOLOGY INDUSTRIAL CO., LIMITED

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

InnoLight TR-FC13R-N00 QSFP28 100G QSFP28 LR4 Ethernet Optical Transceiver

Country/Region	china
City & Province	shenzhen
Categories	Switching Power Supply

Product Details

InnoLight TR-FC13R-N00 QSFP28 100G QSFP28 LR4 Ethernet Optical Transceiver

Fiber Type	Single mode
Weight	0.06kg
Warranty	1 Year
Tx power	-4.3 to + 4.5 dBm
Rx sensitivity	-10.6 to + 4.5 dBm
Extinction Ratio	4.0dB
Single Power Supply	3.3V
Applications	100GBASE-LR4 Ethernet Links

Features of TR-FC13R-N00 QSFP28 100G

Hot pluggable QSFP28 MSA form factor

Compliant to IEEE 802.3ba 100GBASE-LR4

Supports 103.1Gb/s aggregate bit rate

Up to 10km reach for G.652 SMF

Single +3.3V power supply

Operating case temperature: 0~70oC

Transmitter: cooled 4x25Gb/s LAN WDM DFB

TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)

Receiver: 4x25Gb/s PIN ROSA

4x25G electrical interface (OIF CEI-28G-VSR)

Maximum power consumption 4.0W

Duplex LC receptacle

RoHS-6 compliant

Applications of TR-FC13R-N00 QSFP28 100G

100GBASE-LR4 Ethernet Links

Infiniband QDR and DDR interconnects

Datacenter and Enterprise networking

General Description of TR-FC13R-N00 QSFP28 100G

This TR-FC13R-N00 QSFP28 100G is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE 802.3ba standard.

The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.

Reversely on the receiver side, the module demultiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

Functional Description of TR-FC13R-N00 QSFP28 100G

The TR-FC13R-N00 QSFP28 100G receives 4 channels of 25Gb/s electrical data, which are processed by a 4- channel Clock and Data Recovery (CDR) IC that reshapes and reduces the jitter of each electrical signal.

Subsequently, DFB laser driver IC converts each one of the 4 channels of electrical signals to an optical signal that is transmitted from one of the 4 cooled DFB lasers which are packaged in the Transmitter Optical Sub-Assembly (TOSA).

Each laser launches the optical signal in specific wavelength specified in IEEE 802.3ba 100GBASE-LR4 requirements.

These 4-lane optical signals will be optically multiplexed into a single fiber by a 4-to-1 optical WDM MUX. The optical output power of each channel is maintained constant by an automatic power control (APC) circuit.

The transmitter output can be turned off by TX_DIS hardware signal and/or 2-wire serial interface.