Complete Solar geyser Integrated Heat Pipe High Pressure Solar Hot
Water Boiler System with Solar Keymark EN12976
Quickly guidence a, Free brand/LOGO print based on 20GP/40HQ quantity
b, 1% freee spare parts
c, our factory audited by SGS,TUV and BV
d, Sea Port: Shanghai or Ningbo
e, Payment terms: T/T, L/C, Western Union
f, Delivery time: 12 days after deposit in account
g, Certificate: Europe Solar Keymark EN12976/CE/CCC/ISO9001/ISO14001/ ISO45001Work Principle
1,Vacuum tubes absorb solar energy and transmit the heat to heat
pipe (in tube) by the aluminum fin, the liquid in the heat pipe
changes in to vapor which rises to the condenser. Then the conducts
to the water inside the tank and the vapor inside the pipe becomes
liquid, return to the base of the heat pipe and is heated again.
2,Through a thermo-siphon effect (in which hot water rises), hot
water circulates between the water at top and the water at bottom
in tank, the water in tank had been heated then.
3,There is sun and is stored in an insulated tank.
Detailed Photos
Advantages
1, high pressure
2, direct heating, high efficiency
3, heat pipe technology,Non-Freeze in winter
4, no water in tube, less maintance
Product Parameters
| Technical Parameter of Heat Pipe Integrated High Pressure Solar
Water Heater |
| MATERIAL OF OUT TANK | 0.4mm galvanized steel/0.4mm sus304 stainless
steel /0.4mm sus304-ba(bright) |
| MATERIAL OF INNER TANK | 1.2mm sus304-2b stainless steel or sus316 stainless
steeel |
| TANK INSULATING LAYER | 50-60mm high-density polyurethane foamed |
| DIAMETER OUTER/INNER TANK | 460mm/360mm |
| ELECTRICAL HEATER | 1500w; 220v/110v |
| INLET AND OUTLET HOLE | Male 1/2", 3/4" |
| MAX PRESSURE | 1.2Mpa |
| SOLAR COLLECTOR TUBE | 3.3 borosilicate glass with AL/AL-ALN/ALN(single
target) or CU/SS-ALN/ALN(three target) |
| THICKNESS OF GLASS TUBE | 1.6mm |
| VACUUM TUBE TIGHTNESS | P≤0.005 pa |
| ABSORPTION | As=0.93-0.96(am1.5) |
| EMISSION RATIO | Ε h=0.04-0.06(80c± 5c) |
| IDLE SUNNING PROPERTY PARAMETERS | Y=220~260m². C/kw |
| AVERAGE HEAT LOSS COEFFICIENT | Ult=0.6~0.7w/(m2. c) |
| BRACKET: | 1.2mm Stainless steel/1.6mm aluminum alloy/1.5mm galvanized
steel |
| STRUCTURE OF TANK: | Usually holes for p/t valve, water
inlet and outlet, electric heater, magnesium rod;
custom-built will be warmly welcomed. |
| WELDING: | Automatic argon arc welding |
| FASTENER PIECES: | Stainless steel screw |
| SEAL MATERIAL | Stabilized high temperature silicon |
| Opitional Accessories: | System controller SR609C, control electrical heating and display
temperature |
Certifications
Installation Instructions
Suitable both Flat roof and Pitched roof
Compact Heat Pipe Solar Hot Water Heater System Feature1)Highly efficient absorber of high performance with daily average
efficiency over 50%.
2)Start quickly, heat pipe transfers the heat energy into the storage tank in one
direction.
3)With stand pressure of 6 bar, can be connected directly with tap
water.
4)No water inside the vacuum tubes, the system can still work even
with several tubes breakage.
5)Highly efficient insulation with polyurethane foam.
6)Simple structure, easy to assemble and install.
7)Can be used all year around in the cold climate.
8)Can be used together with auxiliary electric heater.
9) Stable and reliable performance.
10) Environmental protection and energy saving.
11) The pressurized hot water will make your bath more comfortable.OUR SERVICE 1, Fast delivery, 40 feet container quantity will deliver in
7 days.
2, Experienced sales team assistant you, fast confirmation
for every related questions from you.
3, Rich experiences for differenct Market (countries), kinds
of customized design will be welcomed.
4, Assistant you load other goods with solar water heater in
one container.
5, Installation guide and train
6, LOGO print and water tank and cartons.FAQ1. Is solar water heating a viable alternative to gas or
electricity?Solar should not be seen as a alternative to gas or electricity,
but rather a supplement. Solar cannot totally replace the need for
gas or electric heating as there are sometimes days when there is
little sunlight. When averaged over a year, a correctly sized solar
system can provide 60%-70% of a household's hot water needs.
Providing more than this is unadvisable, as too much heat will be
produced in the summer. The hot water system system can easily be
automated so hot water is guaranteed regardless of sunlight levels.2. How long will it take to recoup my investment? QIRUI solar collectors are much more affordable than many other
solar hot water heaters. For a household of 4, the price of a full
system may not be too much more than a new electric or gas system.
Depending on you location (solar levels) and current hot water
usage the annual electricity or gas saving will differ. However in
a normal household that spends 25% of its electricity bill on hot
water heating, the full cost of the purchase may be recouped as
quickly as 4-5 years in reduced bills. You will definitely make
considerable savings during the life of the solar hot water heater.3. Can QIRUI solar collectors be used in cold conditions?Yes. QIRUI collectors can be used in temperatures as low as -30oC,
although performance is greatly reduced in such extreme conditions.
Good heat output is still achieved in mild sub-zero conditions.4. What happens if one of the tubes is broken?Firstly, tubes are very strong and not easily broken, but if the
worst should happen, solar tubes can be replaced very easily. They
are inexpensive and available though your local QIRUI distributor.
The HAINING QIRUI solar collectors can operate with several
broken tubes, but the efficiency will be reduced, so it is
recommended that broken tubes be replaced immediately.5. Will water be heated on a cloudy day?Yes. Although the heat output of the solar collector is reduced on
overcast days it will still be able to provide heating. If it is a
heavily clouded day or raining, then more gas or electric boosting
may be required to maintain water at the required temperature. This
system will be automated so you don't have to worry about running
out of hot water on a rainy day.6. Can I use a solar collector with my existing hot water
system? Normally yes. Simple retrofit valves can often be used to allow
solar to connect to your existing cold water inlet. If your tank
cannot accept the solar input directly an additional storage tank
can be installed to pre-heat the cold water prior to entering the
existing tank.7. Are the solar collectors noticeable on the roof?If only the collector is mounted on the roof it should blend into
the roof design quite well. HAINING QIRUI solar collectors are
very thin and can be flush mounted on a roof. From a distance they
look somewhat like a skylight. You may have to check with your
local council regarding building restrictions when installing your
solar collector. Click here to view installation photos. 8. Can QIRUI solar collectors be mounted on a flat surface?Yes they may be mounted on a flat roof, or on the ground by using a
stainless steel Flat Roof Frame. The collector should be installed
at a minimum of 20o angle to ensure optimal heat pipe operation.9. How do I protect my solar system during subzero temperatures?If you have a system that is operating in areas with subzero
temperatures then freeze protection must be implemented. The
easiest means of preventing freezing is to use a controller with a
low temperatures setting, so when the manifold temperature drops
below a certain pre-set temperature (5oC/40oF), the pump will
circulate, warming the collector with water from the bottom of the
storage tank. The pump will not run continually, just periodically,
the frequency of which will depend on the outside temperature. In
extremely cold areas, a closed loop using a glycol/water mix may be
appropriate.10. Will the QIRUI solar collector be a fire hazard during
hot, dry weather? No. The QIRUI solar collector's components are all high temperature
rated and non-flammable so even during strong sunlight with the
circulation pump turned off (stagnation), the system will not catch
alight or give off any sparks. The majority of the solar
collector's components are stainless steel, aluminium, glass or
glass wool. The manifold outlet should be fitted with a temperature
relief valve, which will prevent the manifold temperature from
exceeding 99oC / 212oF. 
