Active Member
|
[China]
Address: QIANQIAO High-Tech Development Zone, WUXI CITY, JIANGSU PROVINCE,21400 China
Contact name:Frank
Jiangsu Qiangli Machinery Co.,Ltd |
|
|
22 Inch Wheel Repair Machine, SYNTEC CONTROLLER Hub Repair CNC Lathe Machine
SPECIFICATIONS
| ITEMS | QLW-22 | QLW--26 | QLW-30 | ||
| Max. swig over bed (mm) | Φ630(22’) | Φ725(28’) | Φ775(30’) | ||
| Max. swig over cross slide (mm) | Φ410 | Φ540 | Φ550 | ||
| Max. Size of alloy wheel | 22’ | 26’ | 28’ | ||
| Cross slide travel (mm) | 330 | 350 | 360 | ||
| Width of the rail | 265 | 330 | 400 | ||
| Length of the rail | 1180 | 1320 | 1630 | ||
| Size of the three-jaw chuck | 10’ | 12’ | 15’ | ||
| Range of spindle speed (RPM) | 50~2500 | 50~2000 | 50~1800 | ||
| Spindle speed control | Automatic | Automatic | Automatic | ||
| Spindle bore (mm) | Φ60 | Φ60 | Φ82 | ||
| Taper of spindle bore | MT6 | MT6 | 1:20/ Φ 90 | ||
| Taper of spindle nose | A2-6 | A2-6 | D1-8 | ||
| Max. size of tool post | 25×25mm | 25×25mm | 25×25mm | ||
| Stations of tool carrier | 4 position | 4 position | 4 position | ||
| Min. setting unit of motor | (Z) long 0.001mm, (X) cross 0.001mm | ||||
| Moving speed of post | (Z) long 8m/min, (X) cross 4m/min | ||||
| Motor power | 5.5KW | 7.5KW | 7.5KW | ||
| Machine base | Whole cast iron base | ||||
| Machine size(L×W×H) (mm3) | 2100 ×1700×1900 | 2300×1750×1950 | 2690×1850×2010 | ||
| Net weight | 1950kgs | 2600kgs | 3000kgs | ||
Standard configuration:
1- 3-Jaws Chuck(With Special Soft Jaws)
2- Manual Quick Change Toolpost ,four-station turret,
3- Automatic lubrication system,
4- Turning the cooling system.
5- With probing system(TP300 Pioneer Sensing Probe TP300;)
6- Diamond Cutter 1 set
7- cnc controller syntec
8- Full Enclose(Security Guard Door)
9- Specific Digital Optimization Software
10- Training Video CD
11- Work Lighting System
Packaging
