Active Member
|
[China]
Address: Building 1.Liandong U Valley ,Shenzhen Road,Taohua Industrial Park,Feixi County,Hefei City,Anhui Province,China
Contact name:Jason
Anhui Sunerise Energy Co., Ltd |
|
|
Civil HOME Use Grade A Quality PV ENERGY MONO Half Cell 450 Watt 166mm 72cells 9BB Solar Panel
Grade A quality PV ENERGY MONO half cell 450 watt 166mm 72cells 9BB
solar panel
Monocrystalline Solar Panel
Features:
High-efficiency half-chip components
Sunerise combines high-efficiency monocrystalline cells with
half-cell module technology to significantly increase module power
and power generation capacity under shadow shading, while reducing
the local temperature rise caused by module working temperature and
hot spots, bringing more ideal returns to investors.
| Maximum Power at STC [Pmax] | 450W |
| Open Circuit Voltage [Voc] | 50V |
| Short Circuit Current [Isc] | 11.47A |
| Voltage at Maximum Power Point [Vm] | 41.4V |
| Current at Maximum Power Point [Im] | 10.97A |
| Power Tolerance | 0~+5W |
| Module Efficiency | 20.7% |
| Maximum Power at NOCT [Pmax] | 333.6 |
| Open Circuit Voltage [Voc] | 42.7 |
| Short Circuit Current [Isc] | 8.73 |
| Voltage at Maximum Power Point [Vm] | 38.3 |
| Current at Maximum Power Point [Im] | 8.73 |
| Values at Standard Test Conditions STC | Air Mass AM1.5,irradiance 1000W/㎡ ,Cell Temperature 25℃ |
| NOCT | Irradiance at 8000W/㎡,Ambient Temperature 20℃,Wind Speed 1m/s |
Product details:
1. High efficiency & low attenuation
Combining the advanced technology of silicon wafer and battery
side, obtain high-efficiency monocrystalline module with
attenuation of less than 2% in the first year
2. Good power generation performance under shadow conditions
Special battery and component design significantly reduces power
loss caused by shadow occlusion
3. Strong anti-hot spot ability
Lower internal current significantly reduces local temperature rise
caused by hot spots
4. Adapt to high temperature and high radiation environment
The power generation gain relative to the whole module is the most
obvious in high-irradiation and high-temperature areas
FAQ
1.Q:Do you have your own factory?
A:Yes, we are professional manufacturer mainly in solar panel for
many years. Our factory is located in Hefei, Anhui, China.
2.Q:What kind of certification you have?
A:ISO9001,ISO14001,ISO18001, TUV,CQC,CE,CEC,UL and so on.
Our products could pass different labor testing according to
different countries' requirements.
3.Q:Where we can use the system?
A:You can use the system for home, for power station, for lighting
system and so on, wnere the grid power is expensive.
4.Q:How about your warranty?
A: We provide 1.5 and 3 years warranty for different products and
whole life technical support.
5.Q:Competitive Price
A:All of our products are produced by our own factory. So the price
is very copetitive.
6.Q:How to do the installation?
A: This portable solar system installation is very simple, only
need to connect solar panel with controller, and push ON/OFF
button, then it will start to work.
7.Q:24-hours online service
A: Please feel free to contact us. Our sales team will provide you
with 24 hours better pre-sale.
