|
[China]
Trade Verify
Address: Rm816,Building 8th,ZhongXi Xiangbinshan,XiXiang Str,Bao’an District,Shenzhen City,Guangdong,China
Contact name:Aaron
Shenzhen Sreada Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
TGA 0B series audio and video wiring harness IP50 waterproof plug
Quick detail of TGA.0B.306 self-locking connectors:
1. keying system («G» key standard) for connector alignment
2. 2 to 32 pins available
3. Solder or PCB contacts(straight or elbow)
4. 360-degree screening for full EMC protection
5. Easy mating, can be blind-mated guiding mechanism ensures precise alignment
6. High-density installation for space-saving
Specifications of TGA.0B.306 self-locking connectors:
| Endurance | >5000 cycles |
| Humidity | Maximum humidity up to 95% at a temperature of 60℃ |
| Temperature | -45℃~+125℃ |
| Vibration | 10~20000HZ,15g |
| Mechanical shock | 100g.6ms |
| Salt spray corrosion test | >48hrs |
| Protection level | IP50 |
| Termination | Solder |
| Fastening type | Push-pull |
| Shell finish | Chrome |
| Shell color | Silver |
| Contact material | Brass |
| Contact color | Gold |
| Insert material | PPS |
Applications of TGA.0B.306 self-locking connectors:
1. medical: therapy applications, medical imaging, cardiac assist devices, diagnostic devices
2. instrumentation: data acquisition, automation, scientific research, test&measurement, sensors
3. broadcast:studios and outside broadcasting, TV and motion picture, HD and SD cameras, remote camero control
4. energy:petrol&gas, nuclear, renewable energies, batteries, fuel cells
5. transport: automotive, railways, avionics, maritime
Cable assembly process :
1. Pass the cable through the sheath, the tail nut, and the cable clamp in turn, and weld it to the insulator assembly in accordance with the order.
2. Install the two-piece insulator clasp onto the welded insulator assembly, noting that the window on the clasp corresponds to the protrusion on the insulator assembly.
3. Install the cable clamp to the appropriate position of the cable, noting that the protrusions on the cable clamp correspond to the grooves on the insulator clasp.
4. Push the insulator assembly, insulator clasp and cable clamp into the plug assembly in turn, paying attention to the protrusion on the insulator clasp ring and the gap in the plug assembly.
5. Tighten the tail nut to the plug assembly.
6. Put the jacket on the corresponding step of the tail nut.
Our advantages:
1. Parts source determine price, The source of our parts is very initial.
2. Price can be negotiable based on quantity and delivery terms.
3. We will try to help customers to reduce freight charge.
4. The price of products changes frequently, if you need to quote price, please inform the model which you need,we will give you the reasonable price as the standard quoted price in the same day.
