|
[China]
Trade Verify
Address: Changjiang South Road, No.17-17, Wuxi, Jiangsu 214000, CN
Contact name:Rona
WUXI WANLI ADHESION MATERIALS CO., LTD. |
|
Verified Suppliers
|
|
|
Good Quality Factory Directly Low Cost Reactive Hot Melt WANLI® PUR-UH168.5A with Viscosity About 50000mPa·s@120℃(Brookfield-ASTMD3236) for 3D Lamination Bonding of Stone-Plastic Panels, Wood-Plastic Panels And Wall Panels To TPU, PVC Films And Others.
Wanli® PUR hot melt adhesive PUR-UH168.5A for 3D lamination bonding is a single-component reactive PUR hot melt adhesive with 100% solid content. PUR-UH168.5A is mainly used for the cladding bonding of substrates such as stone-plastic panels, wood-plastic panels and wall panels with PVC materials with excellent bonding strength. PUR-UH168.5A is featured good initial adhesion, high bonding strength, good fluidity, good thermal stability and handling properties, good humidity and weather resistance.
APPLICATION
Wanli® PUR hot melt adhesive UR-UH168.5A is used for 3D lamination bonding. PUR-UH168.5A is mainly used for the cladding bonding of substrates such as stone-plastic panels, wood-plastic panels and wall panels with PVC materials with excellent bonding strength.
| Application Material | Woodworking 3D Lamination Hot Melt Adhesives |
| Appearance | Light Yellow To Yellow Transparent Solid |
| Component | PUR (Polyurethane) |
| Application Industry | Woodworking 3D Lamination Bonding |
| Solid Content | 100% |
| Operating Temperature | 120~140℃ |
| Melt Viscosity | About 50000mPa·s@120℃(Brookfield-ASTMD3236) |
| Open Time | 2~5min@25℃ |
| Usage Scope | 3D Lamination Bonding of SPC, WPC and Wallboard to PVC |
| Shelf Life | 6 Months |
| Package | 500~2000g/Bag, 20Kg/Barrel, 200Kg/Barrel |
FEATURE
Good initial adhesion.
High bonding strength.
Good fluidity.
Good thermal stability and handling properties.
Good humidity and weather resistance.
USER GUIDE
The package of UR-UH168.5A is suitable for various dispensing equipment.
It is recommended to use at an ambient temperature more than 15℃.
The recommended operating temperature is 120~140℃.
In order to achieve complete curing, it is better to place finished product in a working environment with suitable temperature and humidity (recommended temperature: 23~25℃, about 55% relative humidity).
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
