|
[China]
Trade Verify
Address: Changjiang South Road, No.17-17, Wuxi, Jiangsu 214000, CN
Contact name:Rona
WUXI WANLI ADHESION MATERIALS CO., LTD. |
|
Verified Suppliers
|
|
|
China Manufactory Self-adhesive Floor Lamination Bonding PSA Hot Melt Adhesive WANLI® TPR-7217A with Peeling Strength About 32N (2.5cm*45-55μm on Stainless Steel Plate @180˚)
Wanli® pressure sensitive hot melt adhesive TPR-7217A for
woodworking flat lamination is a TPR(Thermoplastic Rubber)
synthetic rubber based hot melt adhesive. TPR-7217A is specifically developed for self-adhesive floor lamination. TPR-7217A is featured high viscosity, high peeling strength, good aging
resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-7217A is used
for floor mute pad lamination bonding.
| Application Material | Floor Flat Lamination Bonding |
| Appearance | Yellow Block |
| Component | TPR |
| Application Industry | PSA Hot Melt Adhesive for Floor Flat Lamination Bonding |
| Solid Content | 100% |
| Operating Temperature | 160~180℃ |
| Softening Temperature | Around 125℃ |
| Melt Viscosity | About 18000mpa·s (@180℃) |
| Peeling @180˚ | About 32N/2.5cm/45-55μm on Stainless Steel Plate |
| Usage Scope | Self-adhesive Floor Flat Lamination |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-7217A is suitable for standard hot melt adhesive application equipment
such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~180℃, which depends
on the equipment, substrate and environment and other conditions.
STORAGE
Store Wanli® PSA pressure sensitive hot melt adhesive TPR-7217A where it’s dry, cool and avoid direct sunlight. The storage
temperature should be no more than 35℃ and avoid open fire or heat
source.
