Active Member
|
[China]
Address: A1101, Huifeng, No.4 Shashan Road, Jiangyin City, Jiangsu Province, China
Contact name:zhu
Yongjia Polyurethane Co., Ltd. |
|
|
As long as the polyurethane component raw materials (isocyanate component and polyether polyol component) performance indicators meet the formula requirements. Through this equipment, uniform and qualified foam products can be produced. It is made of polyether polyol and polyisocyanate in the presence of a variety of chemical additives such as blowing agent, catalyst, emulsifier, etc., through chemical reaction to foam to prepare foam. Polyurethane foaming machine can be used for automobile interior decoration, thermal insulation wall spraying, thermal insulation pipe manufacturing, bicycle and motorcycle seat sponge processing.
| Flux | 270~1300g/s |
| Injecting time | 0.1-99.9s |
| Generating pressure | 10-20Mpa |
| Control system | PLC automatic control |
| Main body dimension | 1370*1350*2250mm |
| Weight | 300kg |
1.Material injection mixing head can freely move forward and
backward, left and right, up and down;
2.Pressure needle valves of black and white materials locked after
balanced to avoid pressure difference
3.Magnetic coupler adopts high-tech permanent magnet control, no
leakage and temperature rising
4.Automatic gun cleaning after injection
5.Material injecting procedure provides 100 work stations, weight
can be set directly to meet the production of multi-products
6.Mixing head adopts double proximity switch control, which can
realize precise material injection.
7.Automatic switch from frequency converter soft start to high and
low frequency, low-carbon , energy saving, environmental
protection, greatly reduce the energy consumption
8.Full digital, modular integration control all process, accurate,
safe, intuitive, intelligent and humanization
