Active Member
|
[China]
Address: Floor 3rd,Liufeng Building,Liushi Town,Yueqing City,Zhejiang.325604.China
Contact name:Tess Wong
YUEQING WINSTON ELECTRIC CO.,LTD. |
|
|
Input AC Winston Switching Power Supply 0.5A , Triple Power Supply
Product Description:
Technique parameter:
| Model | T-30A | T-30B | ||||
| Specification | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 |
| DC output voltage | 5V | 12V | -5V | 5V | 24V | -12V |
| Output voltage error(Note,2) | ±2% | +2,-6% | +2,-10% | ±2% | +2,-10% | ±6% |
| Rated output current | 3A | 1A | 0.5A | 3A | 1A | 0.5A |
| Output current rage | 0.5-3A | 0.1-1A | 0.1-0.5A | 0.5-3A | 0.1-1A | 0.1-0.5A |
| Wave and noise(Note ,3) | 50mVp-p | 100mVp-p | 50mVp-p | 50mVp-p | 100mVp-p | 100mVp-p |
| Inlet stability(Note ,4) | ±0.5% | ±1% | ±1% | ±0.5% | ±1% | ±1% |
| Load stablity (Note ,5) | ±0.5% | ±5% | ±5% | ±0.5% | ±5% | ±5% |
| DC output power | 30W | 33W | ||||
| Efficiency | 70% | 72% | ||||
| Adjustable range for DC voltage | CH1,+10,-5% | CH1,+10,-5% | ||||
| AC input voltage range | 85-132VAC/170-264VAC selected by switch 47-63Hz,240-370VDC | |||||
| Input current | 0.8A/115V 0.45A/230A | |||||
| AC INnrush current | Cold-start current35A | |||||
| Leakage current | <0.5mA/240VAC | |||||
| Overload proctection | 105%-150%Type,Foldback:current limiting reset,auto recovery | |||||
| Over-voltage protection | ………… | |||||
| High-temperature protection | ………… | |||||
| Temperature coefficient | ±0.03%/°C(0-50°C) | |||||
| Setup rise hold up time | 200ms,100ms,30ms | |||||
| Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||||
| Withstand voltage | Input and output internal,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC | |||||
| Isolation resistance | Input and output internal,Input and enclosure,Output and enclosure,500VDC/100MΩ | |||||
| Working temperature and humidity | -10°C~+60°C(Refer to output derating curve),20%~90%RH | |||||
| Store temperature and humidity | -20°C~+85°C.10%~95%RH | |||||
| Overall dimension | 129×98×38mm | |||||
| Weight | 0.4Kgs | |||||
| Safety standards | Meet UL 1012R requirement (Not apply for the mark) | |||||
| EMC standards | Meet FCC Part15 J Conduction class A | |||||
| Note | ||||||
| 1. The testing condition for the paramenter above is ,230VAC input,rated load,25°C70% RH.Humidity. | ||||||
| 2. Error.include the setting error,line stability and load stability.(Note:5). | ||||||
| 3. Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. | ||||||
| 4. Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. | ||||||
| 5. Load stability test:the load is from 0% to 100%. | ||||||
Product Picture
Dimensions
PS: If you can't find the exact type of your product.Please don't
rush to go away.Contact me and your questions will be replied
ASAP.Thank you for your time.
