Active Member
|
[China]
Address: Floor 3rd,Liufeng Building,Liushi Town,Yueqing City,Zhejiang.325604.China
Contact name:Tess Wong
YUEQING WINSTON ELECTRIC CO.,LTD. |
|
|
Application illustration or photoelectric switch
1 . Detected object: Transparent or opaque body
2 . Decetion of thick carton
3 . Product accounting
4 . Guard again restricted zone being invaded
5. Check out the broken or faulted tobacco rolling paper
Technical Parameters:
| Model NO. | Working voltage | Output | Detection way | |
| Form | State | |||
| G30 -3A 70NA | DC10-30V | NPN | NO | Diffuse type |
| G30 -3A 70NB | DC10-30V | NPN | NC | Diffuse type |
| G30 -3A 70NC | DC10-30V | NPN | NO+NC | Diffuse type |
| G30 -3A 70PA | DC10-30V | PNP | NO | Diffuse type |
| G30 -3A 70PB | DC10-30V | PNP | NO | Diffuse type |
| G30 -3A 70PC | DC10-30V | PNP | NO+NC | Diffuse type |
| G30 -2A 70LA | AC90-250V | SCR Control lable silicon | NO | Diffuse type |
| G30 -2A 70LB | AC90-250V | SCR Control lable silicon | NC | Diffuse type |
| G30-3B3NA | DC10-30V | NPN | NO | Retroreflective |
| G30-3B3NB | DC10-30V | NPN | NC | Retroreflective |
| G30-3B3NC | DC10-30V | NPN | NO+NC | Retroreflective |
| G30-3B3PA | DC10-30V | PNP | NO | Retroreflective |
| G30-3B3PB | DC10-30V | PNP | NC | Retroreflective |
| G30-3B3PC | DC10-30V | PNP | NO+NC | Retroreflective |
| G30-2B3LA | AC90-250V | SCR Control lable silicon | NO | Retroreflective |
| G30-2B 3LB | AC90-250V | SCR Control lable silicon | NC | Retroreflective |
| G30 -3C 102NA | DC10-30V | NPN | NO | Through beam |
| G30 -3C 101NB | DC10-30V | NPN | NC | Through beam |
| G30 -3C 101NC | DC10-30V | NPN | NO+NC | Through beam |
| G30 -3C 101PA | DC10-30V | PNP | NO | Through beam |
| G30 -3C 101PB | DC10-30V | PNP | NC | Through beam |
| G30 -3C 101PC | DC10-30V | PNP | NO+NC | Through beam |
| G30 -2C 101LA | AC90-250V | SCR Control lable silicon | NO | Through beam |
Model composeition and definition of photoelectric switch
G 18 3
A
10 N
A □
—— —— —— —— —— —— —— ——
1 2
3
4
5
6
7 8
| NO | Composition | Code and definition |
| 1 | Basic form | G: Plastic infrared ray photoelectric switch E: Metal infrared ray photoelectric switch |
| 2 | Outward appearance code | 18, 50, 76... |
| 3 | Working voltage | 2: 30-250VAC 3: 10-30VDC 4: 12-240VDC/24-240VAC 5: Special voltage |
| 4 | Detection way | A: Diffused reflection type(scattered reflection type) B: Feedback reflection type mirror(mirror reflection type) C: Penetration type(correlation type) D: Marking detection type G: Optical fiber type |
| 5 | Detection distance | 05:5cm 10: 10cm 30: 30cm |
| 6 | Output form | N:NPN transistor output P:PNP transistor output J: Relay contact output L: AC two-wire output S: With two outputs: NPN and PNP |
| 7 | Output state | A: Normally open(light entering NO) B: Normally close(light sheltering NC) C: Normally open-normally close |
| 8 | Subsidiary | T1: Front delay T2: Rear delay Y: Oil proof T: With aviation connector I: Special requirement |
1.The applications of sensor ?
A: Punch, Machine tool, Automatic controller, Automatic water device, Semi automatic industrial control equipment
2.How to confirm the sensors model ?
A: The buyer need to provide the below information : Voltage NPN/PNP NO/NC/NO+NC Detected object Detected distance
3.How to adjust the distance of the photoelectric switch ?
A: Clockwise make the detected distance increase and anti-clockwise decrease .
4. Difference between photoelectric switch and capacitance type ?
A: (1) They can both detect liquids , but Cm can only be detected through the glass tube or plastic tube , photoelectric switch can not .
(2) The detection distance of the photoelectric switch is larger than the capacitance type
Dimension
G30►
G18►
Photoelectric switch Principle of photoeletric switch
The working principle of the photoelectric switch is that when the beam emitted by the emitter is blocked or partly reflected by the object, the beam by the emitter is blocked or partly reflected by the object, the beam receiver whereby makes a judgment and reacts.
