Results forprotective relay testingfrom 19355 Products.
|
Test Rod Probe D Test Finger Probe IEC61032 Figure 4 Safety Testing Apparatus Product information: This probe conforms to the standard requirement of IEC61032 figure 4 test probe D ...
|
|
|
|
Penetration Apparatus IPX8 Ingress Protection Test Equipment Support For Testing Product information: 1 pressure vessel: stainless steel tank, diameter 0.8 meter, height 1 meter. 2 ...
|
|
|
|
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
IPX7 Immersion Test Chamber HC-IPX7A IP Code of the IPX7 Immersion Test Chamber IEC60884-1 Test The Product Waterproof Pereformance Standard IEC60529 degree of protection provided ...
|
|
|
|
IEC60529 IPX5-6 Spray Test Equipment With Φ6.3mm And 12.5mm Nozzle 500L Tank Product information: Ingress Protection Test Equipment The spray test system is designed and manufactur...
|
|
|
|
IEC 60529 IP1X Ingress Protection Test Equipment Test Sphere Probe With Force Of 0-50N This probe is intended to verify protection of persons against access to hazardous parts for ...
|
|
|
|
IEC61032 Figure 15 Test Rod ,Test Probe 32 Product information: The test rod probe confirms to IEC61032 figure 15 requirements. It is intended to verify the protection provided by ...
|
|
|
|
IEC61032 Figure 6 Sphere Test Probe 1 Product information: This test sphere probe confirms to IEC61032 figure 5 test probe 1,IEC60335,IEC60950, IEC60598,UL507 standards. It is ...
|
|
|
|
IEC 60529 Figure 2 Sand And Dust Test Chamber Product information: The sand and dust test chamber is designed and manufactured according to IEC60529-2001 < Degrees of protection ...
|
|
|
|
IEC60529 IP Code Degrees Ingress Protection IPX1 To IPX8 Test System Product Introduction: The water-proof testing equipment is manufactured in accordance with the standard of ...
|
|
|
|
IP Testing Equipment IEC 60529 IP1X-IP6X And IPX1-IPX9 Waterproof Test Description of IP Testing Equipment: IP Testing Equipment is short for ingress protection testing equipment. ...
|
|
|
|
Electronic IEC Ingress Protection Test Equipment IPX5 IPX6 Hose Nozzle Test Device Product information: The HT IPX5/6 Handheld Jet Nozzle is designed and manufactured according to ...
|
|
|
|
Test Wire Probe D HT-I04 Description: This wire probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
|
|
|
|
IEC60529 Ingress Protection Test Equipment IPX56 Waterproof Testing Device for Lamps With Hand Held Spray Gun Standard: IEC60529 degree of protection provided by enclosures (IP ...
|
|
|
|
IPX8 Pressure Immersion Test Device Standard: IEC60529 degree of protection provided by enclosures (IP Code) of the IPX8, IEC60884-1, IEC60335-1, IEC60598-1. Application: It is ...
|
|
|
|
IEC60529 IP2X Ingress Protection Test Equipment Test Finger Probe B Standard: IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, and UL1278 figure 8.4. Standard ...
|
|
|
|
IEC60529 IP4X Ingress Protection Test Equipment Test Rod Probe D 1 mm diameter Standard:IEC61032 figure 4 and IEC60529 for IP4 and IEC60065. Standard description: 13.2 Test ...
|
|
|
|
IEC61032 Figure 3 Test Finger Probe Test Rod Probe C 2.5mm Product information: This probe conforms to standard requirements of IEC61032 test probe C and IEC60529 for IP3 and ...
|
|
|
|
12.5 mm Test Sphere Probe 2 With Handle , IEC61032 Figure 6 Probe 2 Test Probe Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2,IEC60529 of IP2. It ...
|
|
|
|
Ipx9k High Pressure Fan Spray Test Chamber Ingress Protection Test Equipment With 100 ~ 150MM Jet Distance Standard: IEC60529, GB4208, DIN40050-9, IS020653, EN 60529, DIN 40050-9, ...
|
|
|