Active Member
|
[China]
Address: 2nd Floor, Jinguang Property park, Dafa New Area, Longxi Community, Longgang Dist, Shenzhen, China
Contact name:Lilian
Shenzhen bosen Plastic Products Co. , Ltd. |
|
|
Borosilicate Glass Bell Jar Decorative Injection Molding For Display
Please kindly note all below clear dome cover with base have stock and available for order.
| Product name | China factory supplier cheap wholesale Display Decorative Clear Bell borosilicate glass dome with base |
| Material available | Clear PS for top cover, black or white ABS for base |
| Color | White or black, custom color willl have MOQ |
| Material thickness | 1.2m |
| Surface treatment | Can add custom logo base on MOQ 5,000pcs |
| Mold material | injection molding process |
| Size available | 12.5x21cm 10x20cm 10x16cm 8.5x15cm 8x12.5cm 6x12.5cm 6x9cm 5x7cm |
We have mold for all the size listed above. Gerneral stock quantity is approx 5000pcs for each size, if your order quantity more than 5000pcs, please contact for learn the lead time and price.
Vacuum forming a simple process which you may already be familiar with, where a hot sheet is stretched over a male mold, and vacuum is applied between the sheet and the mold, pulling the sheet tight to the mold. Once it cools, the sheet takes on the shape of the tool. With our 3-dimensional trimming equipment, we can then trim out the finished part with a high degree of accuracy and repeatability. There are an infinite number of applications of this process.
Distortion printing is the process of printing a distorted version of an image onto a sheet of plastic and systematically vacuum forming the sheet on a mold so that specific areas of the printed image appear in corresponding areas of the resulting three-dimensional large part. Bosen plastic utilizes the screen printed plastic sheets in conjunction with vacuum thermoforming expertise to create a molded part containing the proper image displayed on the final product
Vacuum forming is not new industry, display manufacturers have been
using the technology for many years to manufacture lightweight
original retail displays.
Vacuum forming is the process of moulding plastic material over a
relatively inexpensive mould to obtain various shapes that would
otherwise require expensive fabrication, which would be cost
prohibitive for multiple quantities and not as consistent in
quality.
What's new is the process is applying distortion printing. Using
software tools that distort the image so when it is vacuum formed
over a particular shape it looks in perspective, just like the
logos on football filed. The 3 dimension is further enhanced with
our 5 axis routing machine allowing complex shapes to be cut.
Distortion printing is the process of printing a distorted version
of an image onto a sheet of plastic and systematically vacuum
forming the sheet on a mold so that specific areas of the printed
image appear in corresponding areas of the resulting
three-dimensional finished part. At Bosen plastic Co.,Ltd we are
experts in the process, which allows us to deliver the quality and
detail in our products that is expected in the process of
distortion printing to shine through every piece we manufacture.
The overall process of distortion printing at BOSEN is performed
with control, due to the precise computer software, and with
increased speed and repetition. Some key advantages that make
distortion printing a top choice in developing are: design
innovation which leads to improved branding, higher consumer
awareness for our clients, and accuracy in the automated distortion
process that helps to eliminate the expenditures associated with
previous trial and error procedures.
Custom design display project
