Active Member
|
[China]
Address: No. 1617,16TH Yichuang street, Jiulong Avenue, Huangpu District, Guangzhou City, Guangdong, 510700, P.R. China
Contact name:Sylvia
Guangzhou Shusen Trading Co., Ltd. |
|
|
SHP214 Sharp Projector Bulbs
Projector Lamp Shp214 AN-SX80LP With Housing For PG-SS5 PG-SW800 PG-SX80 PG-SX85 XG- FS510A
Sharp originla projector lamp AN-SX80LP (shp214), compatible for PG-SS5, PG-SW800, PG-SX80, PG-SX85, XG- FS510A, XG-FX8218A, XG-FX900A, XG-MX435A, XG-MX450A, XG-MX455A,XG-MX465A, You can be assured each lamp has undergone strict quality checks for beam performance, ignition, voltage, appearance, connections and run-time, so you can trust it to work flawlessly in your projector. When you purchase with Buyquest or Projectorquest, you get quick delivery, a 30-day money back guarantee, easy returns and the best available comprehensive manufacturer warranty.
Specifications:
| Product name: | Projector Lamp |
| Model No. | AN-SX80LP SHP214 |
| Condition: | 100% Brand new |
| Type: | Compatible lamp with Housing |
| Life time : | ≥2000-8000Hour |
| Used in the these projector: | PG-SS5, PG-SW800, PG-SX80, PG-SX85, XG- FS510A, XG-FX8218A, XG-FX900A, XG-MX435A, XG-MX450A, XG-MX455A,XG-MX465A |
| Installation: | Easy installation. |
| Warranty: | All items have been QC tested and 180 days Warranty at least |
| Package: | Each lamp in a single box with foam protection. One pair gloves and instruction inside. |
Warm Noted:
Be sure to use an shp214 Projector Lamp for replacement.
Be sure to turn off the unit and unplug the power cord before replacing the lamp
The lamp remains hot after the unit is turned off with the TV.
If you touch the lamp, you may burn your fingers. When you replace the lamp
Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp
If you touch it, wipe off the fingerprints with a soft cloth
Installation:
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.
