Active Member
|
[China]
Address: B905, Building 1, Chuangxin ZhihuiGang, No.155, Hongtian Road, Shajing Xinqiao street, Baoan District, Shenzhen 518103
Contact name:Carrie Jiang
Shenzhen Touch-China Electronics Co.,Ltd. |
|
|
15" RS232 Industrial Touch Screen Panel With 10 Fingers Touch
It’s a kind of projected touch panel with USB interface. It can support win7, win8, win10 OS and can realize 10 finger point touch
Projected Capacitive Touch Screen Technology
Projected Capacitive Touch (PCT; also PCAP) technology is a variant of capacitive touch technology . All PCT touch screens are made up of a matrix of rows and columns of conductive material , layered on sheets of glass . This can be done either by etching a single conductive layer to form a grid pattern of electrodes , or by etching two separate , perpendicular layers of conductive material with parallel lines or tracks to form a grid . Voltage applied to this grid creates a uniform electrostatic field , which can be measured . When a conductive object , such as a finger , comes into contact with a PCT panel , it distorts the local electrostatic field at that point . This is measurable as a change in capacitance . These kind of the touch screen are well used in many applications.
Product Specification of Pcap Touch :
| Size: | 15inch |
| Total Thickness: | 3.3±0.3mm |
| Outline of Cover Lens: | 345.1*269.1±0.3mm |
| Outline of ITO Sensor: | 323*243.5±0.3mm |
| Viewing Area: | 305.1*229.1±0.3mm |
| Active Area: | 306.1*231.1±0.3mm |
TP Structure: | G+G |
| Controller: | ILITEK, WEIDA, EETI, Silicon Works etc.(Optional) |
| Cover glass thickness: | 1.1mm,1.8mm,2mm,3mm,4mm,5mm,6mm (Optional) |
| Cover glass treatments: | AG, AR, AF, AE (Optional) |
| CTP interface: | USB |
| Operating system: | Win7, Win8, Win10, WCE, Android, Linux, XP |
| Working temperature and humidity: | -20°C~70°C,20~85% RH, non-condensing |
| Storage environment and humidity : | -30°C~80°C, 20~85% RH, non-condensing |
| Transparency | ≥85% |
| Response time: | <10ms |
| ESD Air discharge: | 8KV |
| ESD Contact discharge: | 4KV |
| Pen hitting life: | ≥10,000,000/point |
| Pen sliding Durability: | ≥500,000 times |
| Finger Touch life: | ≥35,000,000 times |
| Certifications: | CE, FCC, Rohs |
| Aspect ratio: | 4:3 |
| Report rate: | 100HZ |
| Input method: | Finger or capacitive pen |
| Warranty: | 1 Year |
Capacitive Touch Screen Features:
Advantages of Touch-China:
Installation way of Touch Panel
Note 1: In order to make a touch panel work normally, please make sure that the host device is grounded.
Note 2: All environmental characteristics listed above should be less than 1 atmospheric pressure.
Note 3: The touch panel must be assembled with LCD panel by VHB or other materials, the control board should be fixed on LCM bezel or other mechanical parts of the system and then be grounded; In ESD test, the touch panel should work normally and there should be no damage to the appearance, when no static electricity discharges. However, irregular changes like display flickering are acceptable when static electricity discharges.
Note4: The touch panel may be damaged functionally or work unstably if the panel are not be grounded though your system to earth.
Note5: In order to make a touch panel work normally, power supply or power adapter has to conform to IEC 62684.
Packaging way of Touch Panel :
Put 5pcs inside a box, each piece is separated by a piece of
expandable polyethylene. Make sure FPC is not twisted and
protective film remains
smooth.
Put two boxes into a large carton, fill the empty space with
expandable polyethylene.
