Active Member
|
[China]
Address: B905, Building 1, Chuangxin ZhihuiGang, No.155, Hongtian Road, Shajing Xinqiao street, Baoan District, Shenzhen 518103
Contact name:Carrie Jiang
Shenzhen Touch-China Electronics Co.,Ltd. |
|
|
| Size: | 21.5inch |
| Total Thickness: | 2.4±0.3mm |
| Outline of Cover Lens: | 533.4*324.86±0.3mm |
| Outline of ITO Sensor: | 492.99*286.39±0.3mm |
| Viewing Area: | 476.64*268.11±0.3mm |
| Active Area: | 479.14*270.61±0.3mm |
TP Structure: | G+G |
| Controller: | ILITEK, WEIDA, EETI, Silicon Works etc.(Customized) |
| Cover glass thickness: | 1.1mm,1.8mm,2mm,3mm,4mm,5mm,6mm (Customized) |
| Cover glass treatments: | AG, AR, AF, AE (Customized) |
| CTP interface: | USB |
| Operating system: | Win7, Win8, Win10, WCE, Android, Linux, XP |
| Working temperature and humidity | -20°C~70°C,20~85% RH, non-condensing |
| Storage environment and humidity : | -30°C~80°C, 20~85% RH, non-condensing |
| Transparency | ≥85% |
| Response time: | <10ms |
| ESD Air discharge: | 8KV |
| ESD Contact discharge: | 4KV |
| Pen hitting life: | ≥10,000,000/point |
| Pen sliding Durability: | ≥500,000 times |
| Finger Touch life: | ≥35,000,000 times |
| Certifications: | CE, FCC, Rohs |
| Aspect ratio: | 16:9 |
| Report rate: | 100HZ |
| Input method: | Finger or capacitive pen |
| Warranty: | 1 Year |
Projected Capacitive Touch panel:
Projected capacitive touch panels are built with two parallel layers of ITO but, but unlike the old and cheap resistive touch panels, the ITO layers in a projected capacitive touch panel are sealed between two sheets of glass by an optically clear adhesive.
There is no air gap between layers like in a resistive touch panel.
The patterns on the two parallel ITO layers form a grid of capacitors.
The electric fields of these capacitors are projected through the top layer of glass.
When the user places a finger near the top surface of the touch panel, it couples with the electric fields.
This coupling changes the capacitance of several of the capacitors in the vicinity of the finger.
An algorithm converts these changes in capacitance into a location along the X and Y axes of the panel.
Samples in stock: 1~3 working days
Customized project: 10~15days for samples
Mass production: 10~18days
FAQ:
Q. Are you a factory or trading company?
A: We are a factory.
Q. Does your products have CE&Rohs certificates?
A: Yes.
Q. What’s the shipping method?
A: By sea / air / express, which methods to be used on the basis of customer’s requirements.
Q. What’s the payment methods?
A: T/T, 30% deposit before production, the balance before shipment.
Q. What size of touch screen can you manufacture?
A: 3.5” to 65”, the bigger size are researching and developing.
Capacitive Touch Screen:
Capacitive touch screen is very different with traditional resistive touch screen. When the resistive touch screen works, you can only judge a touch point. And if there are two or more touch points, you can not make the right judgments. So the resistive touch screen applies only to judge a few simple actions such as click, drag and drop. The capacitive multi-touch screen can decompose the user's touch into colleting multi-point signal and determining the significance of the signals, and complete the judgments of complex action. Moreover, you can feel it when you lightly touch the projected capacitive touch sensor panel. Better durability, more than 90% light transmission rate, high transparency than the traditional resistive touch screen are the advantages of our products.
