Active Member
|
[China]
Address: No.7, Shengfeng Road 523039, Xinhe Industrial Park, Wanjiang, Dongguan, Guangdong, China
Contact name:Echo Zhang
Dongguan Gaoxin Testing Equipment Co., Ltd.， |
|
|
Synthetic Leather Rubber Testing Equipment of DIN Abrasive Tester ,
Abrasion Resistance
1.Quick Details
Name | DIN abrasive tester |
Usage | test the friction of surface of rubber , tire, conveyor belt, shoe sole, synthetic leather |
Power | 1∮,AC220V,3A |
Weight | 61kg |
Volume | 70×30×30cm |
2. Description
The tester is for the measurement of abrasion resistance or rubbers
(vulcanized thermoset rubbers and thermoplastic elastomers) that
are subject to abrasive/ frictional wear in actual service. The
abrasion resistance is measured by moving a test piece across the
surface of an abrasive sheet mounted to a revolving drum, and is
expressed as volume loss in mm3 or abrasion resistance index in
percent. For volume loss, a smaller number indicates better
abrasion resistance, while for the abrasion resistance index; a
smaller number denotes poorer abrasion resistance.
3. Specifications
Sample | Diameter of 16mm,thickness of 6~15mm |
Fixture load | 2.5N |
Weight load | 2.5N,5N |
Fixture lateral moving distance | 4.2mm/circle |
Diameter of the cylinder | (150±0.2)mm |
Length of the cylinder | 460mm |
Rotation speed of the cylinder | 40rpm |
Distance reservation | 40m/20m(equals 84 circles/42 circles) |
Abrasion speed | 0.32m/sec |
Incline angle | 3°(the angle between sample support axle and the vertical plane of cylinder) |
Volume | 70×30×30cm |
Weight | 61kg |
Power | 1∮,AC220V,3A |
4.Pictures
