Active Member
|
[China]
Address: No.7, Shengfeng Road 523039, Xinhe Industrial Park, Wanjiang, Dongguan, Guangdong, China
Contact name:
Dongguan Gaoxin Testing Equipment Co., Ltd.， |
|
|
Mobile Phone Testing Equipment For soft pressure test
Quick Details
Alternative name | Mobile phone hardware compression tester |
Function | Simulating people’s seating pressure on the mobile phone, check the structural strength |
Feature | Cylinder drive |
Weight | 35kg |
Volume | 38×56×58cm |
Test standard | YD/T 1539-2006 |
Equipment Overview:
Mobile phone soft pressure test equipment is used for simulating people’s seating compression on the mobile phone, and check the structural strength.
Mimicking human life repeatedly seat and create soft pressure on the mobile.
The pressing plate is a round rod made of aluminum with certain hardness, adjust the pressure to 17kg and check the damage degree after get set times.
To Meet The Standard:
YD / T 15392006 standard
The mobile handset is not packing, and put on battery power by supporting lock the keypad facing up, body and mounting bracket vertically placed in the axial length of the rod 12CM aluminum extrusion head to (250 ± 10 ) N, 15-30 times per minute frequency extruded samples 1000 times,
After the function, appearance and assembly shall comply with the relevant standards. Pair of folding, sliding and rotating structure of the handset , in its closed condition should be tested.
Main Specification:
Model | GX-5615 |
Test the largest samples | 200 cm * 10 cm, 4 cm height adjustable |
Electricity | Pneumatic control |
Work frequency | 10～60 times/min |
A set of calibration device | Pressure sensor is 100 kg |
Alarming time | 5-10 seconds (fixed) |
Pressure head requirements | Select aluminum rod |
Machine dimension | 380*400*900mm |
Weight | 45kg |
Power | AC220/50HZ |
