Pad Printing Steel Plate

Pad Printing Steel Plate
Packing︰Wooden case 
Usage︰Used by Open-ink tray pad printer. Design and drawing document etched on the surface of pad plate . Installed it to the pad printer. 

Technical Parameter︰ 
1. Thickness: 10.0-10.5mm;
2. Rouhness concentration ofSurface: 0.025 
Production Advantage:
High strength Bearing steel wrought; High wear resistance; Sophisticated structure to be etched fine imaging both streak and halftone; long life ensure low cost. 
Use Method:
Etching printing document to the surface of pad plate;
Measure the depth :Install into the ink tray of pad printer
Testing after adding ink 
Safe Caution:Be careful to carry because of weight 
Storage︰Inject rust-preventative oil into the surface of pad plate;
 PVC or Nylon film package;
 Store in drying and shady place

1,All plates are made of imported steel, high hardness, high density and high brightness. 
2,Can be etched with high-definition pattern, long using life. 
3,Various kinds, full range that covering plates of single side and both sides. 

Specification:

3"×4",3"×5",3"×6",3"×7",3"×8",3"×9"

4"×4",4"×5",4"×6",4"×7",4"×8",4"×9"

5"×4",5"×5",5"×6",5"×7",5"×8",5"×9"