Beijing Silk Road Enterprise Management Services Co.,LTD |
Verified Suppliers
|
|
Diffused Silicon Miniature Pressure Sensor For Automobile Engine
Oil
Diffused Silicon Pressure Sensor is an
isolated oil - filled pressure sensor core with high performance,
low cost and small size. It uses MEMS Silicon chip. Manufacturing
of each sensor is a process with strict aging, screening and
testing to ensure the excellent quality and high
reliability. This product has high anti-overload capacity and
wide temperature range, it is widely used in automobiles, loading
machinery, pumps, air conditioning and other occasions where have
high requirements on small size and cost-effective.
Features:
Applications:
Outline Construction:(Unit: mm)
<20MPa
≥20MPa
Specification:
Construction Condition | |
Diaphragm material | SS 316L |
Housing material | SS 316L |
Pin Wire | Kovar/100mm silicone rubber wire |
Back pressure tube | SS 316L (gauge and negative pressure only) |
Seal ring | Nitrile rubber |
Electrical Condition | |
Power supply | ≤2.0mA DC |
Impedance input | 2.5kΩ~5 kΩ |
Impedance output | 2.5kΩ~5 kΩ |
Response | (10%~90%):<1ms |
Insulation resistance | 100MΩ,100V DC |
Overpressure | 2 times FS |
Environmental Condition | |
Media applicability | Fluid which has no corrosion on stainless steel and nitrile rubber |
Shock | No change at 10gRMS,(20~2000)Hz |
Impact | 100g,11ms |
Position | Deviate 90° from any direction, zero change≤±0.05%FS |
Basic Condition | |
Environment temperature | (25±1)℃ |
Humidity | (50%±10%)RH |
Atmospheric pressure | (86~106) kPa |
Power supply | (1.5±0.0015)mA DC |