|
[China]
Trade Verify
Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Contact name:Richard SHEN
TORICH INTERNATIONAL LIMITED |
|
Verified Suppliers
|
|
|
ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe for Heat Exchanger and Condenser
TORICH is a Professional Manufacturer of ASTM A511 MT304 Seamless Steel, which is for Nickel-Iron-Chromium Alloy Steel Tubing for General Service
We can manacture stainless steel tubes based on the following
technical standard:
ASTM A213,ASTM A312,ASTM A511,ASTM A269,ASTM A249,ASTM A358
The Stainless Steel Grade can cover the following:
ASTM A213 TP304 TP304L TP304H TP310S TP316 TP316L TP316H TP317
TP347
ASTM A312 TP304H TP309H TP310H TP316H TP321H TP347H TP348H TP304
TP309S TP310S TP316 TP321 TP347 TP348
ASTM A511 MT304, MT304L, MT309S, MT310S, MT316, MT316L, MT317,MT321, MT347
ASTM A269 TP304 TP304L TP321 TP347 TP316 TP316L TP348 TP317
ASTM A249 TP304 TP304L TP321 TP347 TP316 TP316L TP348 TP317
ASTM A358 TP304
| Producsts Name | ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe for Heat Exchanger and Condenser |
| Technical Standard | ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe |
| Steel Grade/Steel Numbe | UNS N08120 UNS N08800 UNS N08801 UNS N08810 UNS N08811 UNS N08890 UNS N06811 |
| Size Range | OD: 5mm-813mm WT: 0.5-50mm Length: max 12000mm Cutting Length: available according to customer's requirement. |
| Delivery Condition | Bright Annealing. Pickling and Solution Heat Treatment. |
| Surface Treatment/Surface Condition | Bright Surface. Dull Surface. Polish Surface. |
| Tube Inspection | 100% Dimensional Check 100% Eddy Current Test (ETD) 100% Ultrasonic Test (UTD Mechanical Properties Inspection, Internal Lab test report or Third Party Inspection Report. |
| Inspection Istrument | Outside micrometer, wall thickness micrometer, inside dial gauge, vernier caliper, tensile testing machine, hardness tester, eddy current flaw detector, metallographic analyzer, surface roughness meter |
| Tube Application | Heat Exchanger and Condenser |
| Production Process | Round steel warehousing → round steel inspection → round steel sawing → central hole drilling → perforation → pickling → cold drawing or cold rolling (finish rolling) → annealing → straightening → head and tail cutting → finished product inspection → packaging → delivery |
Chemical composition for ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
| Material | Ni | Cr | Ir | C | Mn | P | S | Si |
| UNS N08120 | 35.0min 39.0max | 23.0min 27.0max | remainder | 0.02min 0.10max | 1.5 | 0.040max | 0.03 | 1.0 |
| UNS N08800 | 30.0min 35.0max | 19.0min 23.0max | 39.5min | / | 1.5 | / | 0.015 | 1.0 |
| UNS N08801 | 30.0min 34.0max | 19.0min 22.0max | 39.5min | 0.10max | 1.5 | / | 0.015 | 1.0 |
| UNS N08890 | 40.0min 45.0max | 23.5min 28.5max | remainder | 0.06min 0.14max | 1.5 | / | 0.015 | 1.0min 2.0max |
| UNS N06811 | 38.0min 46.0max | 27.0min 31.0max | remainder | 0.03max | 2.0 | 0.045 | 0.030max | 0.60max |
Mechanical Properties A of ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
| Alloy | Condition (Temper) | Tensile Strength min, psi (MPa) | Yield Strength, (0.2 % offset), min, psi (MPa) | Elongation in 2 in. or 50 mm (or 4D), min,% |
| UNS N08120 | hot-f i nished annealed or cold-worked annealed | 90 000 (621) | 40 000 (276) | 30 |
| UNS N08800 | cold-worked annealed | 75 000 (520) | 30 000 (205) | 30 |
| UNS N08800 | hot-f i nished annealed or hot-f i nished | 65 000 (450) | 25 000 (170) | 30 |
| UNS N08810 and UNS N08811 | hot-f i nished annealed or cold-worked annealed | 65 000 (450) | 25 000 (170) | 30 |
| UNS N08801 | hot-f i nished annealed or cold-worked annealed | 65 000 (450) | 25 000 (170) | 30 |
| UNS N08890 | hot-f i nished annealed or cold-worked annealed | 75 000 (520) | 30 000 (205) | 35 |
| UNS N06811 | hot-f i nished annealed or cold-worked annealed | 85 000 (585) | 35 000 (240) | 30 |
Keywords ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
seamless pipe; seamless tube; UNS N08120; UNS N08800; UNS N08801;
UNS N08810; UNS N08811; UNS N08890; UNS N06811
Conditions and Finishes Normally Supplied of ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
This appendix lists the conditions and f i nishes in which pipe and
tube (other than converter sizes) are normally supplied. These are
subject to change and the manufacturer should be consulted for the
latest information available.
Cold-Finished Tube and Pipe:
Cold-Finished, Annealed, with Ground Outside Diameter—The inside
diameter may have a bright f i nish when material is annealed in a
protective atmosphere; otherwise, the inside diameter is supplied
descaled as necessary. Available in sizes1⁄ 2 to 4 in. (12.7 to 102
mm), inclusive, in outside diameter in both normal and heavy-wall
tube, and pipe sizes, all schedules, of corresponding outside
diameter dimensions.
Cold-Finished, Annealed,and Pickled (Not Ground)—Outside and inside
diameter will have dull, matte (pickled) surfaces. Available in
sizes
1 ⁄ 2 to 6 5 ⁄ 8 in. (12.7 to 168mm), inclusive, in outside
diameter in both normal and heavy-wall tube, and pipe sizes, all
schedules, of correspond-
ing outside diameter dimensions.
Hot-Finished Tube:
Hot-Finished, or Hot-Finished Annealed (Not Pickled) Tube—Has an
oxide surface resulting from the hot finishing operation. Intended
generally for machined parts where the oxide surface will be
removed.
Hot-Finished, or Hot-Finished Annealed (Pickled)Tube—Has the oxide
surface removed on both outside and inside diameters by pickling.
Surface may be spot ground for removal of minor surface
imperfections at the manufacturer’s option.
Hot-Finished, or Hot-Finished Annealed (Machined Outside and Inside
Diameters) Tube—The outside and inside diameter surfaces are
machined to specif i ed dimensions. Minor surface imperfections may
be spot ground for removal, at the manufacturer’s option.
Prodution Pictures for ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
Products Application of Heat Exchanger and Condenser
Production Process of ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
Products Workshop of ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
Delivery and Packing of ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
FAQ of ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe
1. who are we?
TORICH is not only professional manufacturer and exporter, but also
international marketing
and sales company in the field of steel tubes from China. Our factory was established in 1997
with the name of Haiyan Sanxin Steel Pipe Co., Ltd. Our technicians are equipped with great
engineering experience in steel pipe industry for more than 22 years, they have great comma-
nd of production technology for Cold Drawing and Cold Rolling, as well as heat treatment and
inspection. So we have a strong technician team and manufacturing capability.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Stainless Steel/Carbon Steel/AlloySteel,Titanium,Copper/Brass,etc.
4. what services can we provide?
Accepted Delivery Terms:
FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Deliv-
ery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit
Card,PayPal,Western Union,Cash,Escrow;
Language
Spoken:English,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
