Active Member
|
[China]
Address: China Zhejiang Wenzhou Economic Development Zone
Contact name:
Zhejiang THOR Electric Co., Ltd |
|
|
Monitoring network signal, two in one, multifunctional power supply, lightning protector, household protection surge
Product Details
The control signal network lightning protection dual
protection device is designed and manufactured according to the
standard of IEC and GB, and meets the requirements of IEEE802.3AT.
It is suitable for the server, wireless AP, network camera, network
switch, computer communication system, monitoring and control
system, door control system, automatic control system, and security
system, which are powered by POE network wire. Lightning protection
and surge protection for all kinds of signal circuits, such as data
transmission, etc.
Product specification
| Type | TRSS-RJ45 |
| Max continuous operating voltage Uc(VAC) | 5V |
| Nominal discharge current (8/20μS) ln(kA) | 5kA |
| Voltage protection level Up(kV)≤ | 20V |
| Adaptive date transfer rate | 100/1000Mbps |
| Insertion loss | ≤1dB |
| Respeonse Time | ≤1ns |
| Protect network lines | 1~8 |
| Surface Properties | 100x25x25 |
| Line interface | RJ45 |
| Way to lnstall | Series Connection |
Working principle of product
During the operation of the equipment, the lightning
arrester will play a protective role once the abnormal voltage
occurs. When the protected device is running under normal working
voltage, the arrester will not work, and it will be regarded as a
circuit for the ground. Once the high voltage is present and the
insulation of the protected equipment is endangered, the lightning
arrester acts immediately and leads the high voltage impact current
to the earth, thus limiting the amplitude of the voltage and
protecting the insulation of the electrical equipment. When the
overvoltage is gone, the arrester is restored to its original state
quickly, so that the system can supply electricity normally. The
main function of the lightning arrester is to reduce the voltage
value of the protected equipment through the action of parallel
discharge gap or nonlinear resistance, and to reduce the voltage
value of the protected equipment, so as to protect the power
equipment.
Use of attention
1. identify the input / output interface identifier of
the lightning protector, input the external line and output the
device.
2. grounding lines should be short, thick and straight,
so as to reduce the influence of distributed inductors on the
ability of lightning electromagnetic pulse.
3. the grounding of the signal protector should be
connected to the grounding grid through the electronic switch.
4. the lightning protector is connected between the
protected device and the signal channel in series.
Product features
1. traffic flow to further improve safety
2. limit the precision of the voltage to say how much!
3. installation and use of convenient novice can also be
easy to install
4. strict product structure, meticulous and comprehensive
protection
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd
has built everything to offer a wide range of innovative and
reliable surge protection solutions and products
