AC Converter Surge Protector Plug SPD Lightning Protection British Standard

power conversion socket, surge protection, lightning protection switch converter, British standard.

Brief introduction

   The power converter, also known as the AC converter, is one of the transformers, which can transform the use of different voltage. When the operation is overvoltage or the lightning overvoltage is overvoltage, the energy that the ordinary power converter can only absorb and its limited absorption can not even be completely absorbed. Once the maximum value of its absorption energy is reached, the internal temperature fuse will disconnect and cut off the power supply. The power converter no longer provides power and anti surge protection for your equipment, and the lightning protection and anti surge protection converter can automatically restore the switch protection for you to solve this harm and trouble.

Product features

   1. SPD lightning protection module provides three protection for signal, radio frequency and power supply.

   2. high quality flame-retardant shell

   3. thickened copper band connections

   4. built in ceramic gas discharge tube to absorb excess current.

Product specification

  1.Rated Operating Voitage(UC):250V～

  2. Voltage protective level(UP):1.0KV

  3. Max discharge current(IMAX):6KA

  4. Nominal discharge current(IN):3KA

  5. Protection mode: L-N

  6. technical parameter: MAX2.5KW-MAX10A

Working principle of product

   Lightning plug is an instantaneous voltage absorber, which uses a lightning rod or a varistor, is installed between the input lines to form an infinite impedance. When the instantaneous voltage occurs, the resistance device is rapidly reduced and the transient energy is transferred to protect the efficiency of the internal electrical equipment. Therefore, lightning protection socket can effectively absorb surge pulses from power supply system, so that electrical appliances can be used safely in harsh environment and in multi mine area.

Use of attention

  1. do not artificially change the shape of the plug

  2. do not use two more powerful electrical appliances on one socket.

  3. if plugs or outlets or power lines are too hot or fire, they should be stopped and replaced.