Active Member
|
[China]
Address: China Zhejiang Wenzhou Economic Development Zone
Contact name:
Zhejiang THOR Electric Co., Ltd |
|
|
BNC monitoring signal, multi interface lightning arrester, control signal, lightning protection, surge prevention.
Product description
The control signal lightning arrester is a lightning
protection measure developed by Zhejiang tohr Electric Co., Ltd.,
which is independently developed for signal circuit protection. The
effect of the control signal lightning arrester is that when the
transmission line is impacted by the inductive thunder and other
transient overvoltages, the impact current is discharged to the
earth through the protection branch of the surge protector, and the
output voltage is placed in the allowable voltage range of the
equipment, which can effectively prevent this situation and ensure
the safety of the equipment.
Product features
1. low insertion loss to ensure unblocked lines
2. the low attenuation and return loss in the wide
frequency range ensure that the lightning arrester does not affect
the system performance.
3. core components are strictly screened and their
performance is superior.
Product specification
| Model and specofocation | TRSS-BNC | ||||||
| Working voltage | 24V | ||||||
| Max continuous operating voltage | Uc | 30V | |||||
| Voltage protective level | Up(V)〈 | 〈60 | |||||
| Nominal discharge current | In(8/20μS) | 10kA | |||||
| Response time | ns | ≤10 | |||||
| Characteristic impedance | 75Ω | ||||||
| Insertion loss | ≤0.1dB | ||||||
| Configuration dimension | 52×25×25 | ||||||
| Interface mode | BNC | ||||||
| Operating condition | Temp:-40℃~+70℃ | ||||||
| RH≤95%(25℃) | |||||||
| Sea level elevation≤3km | |||||||
| Remarks | Other max continuous operating voltage can be customized | ||||||
Working principle of product
The control signal surge protector is connected to the front end of
the protected equipment. When the transmission line is impacted by
the inductive thunder and other transient overvoltage, the impact
current is discharged to the earth through the protection branch of
the surge protector, and the output voltage is placed in the
allowable voltage range of the equipment, thus ensuring the safety
of the operating equipment.
Use of attention
1. identify the input / output interface identifier of the
lightning protector, input the external line and output the
connection device.
2. when installing, make sure that the "one" screw is
installed in place, making the line combination firmly. If the
installation is finished, the multimeter can be used to test
whether the signal lines are connected. Do not install SPD on live
line, otherwise it may damage SPD and equipment to be protected.
3. connect protectors to the front-end of the protected
devices, and connect them reliably.
Company profile
Thor has been designing new products to meet the RoHS
directive since 2006. Thor’s ongoing commitment to RoHS compliance
includes continuing efforts to reduce the presence of hazardous
substances in the design and manufacture of a growing number of
popular products.
Ltd is committed to meeting the requirements of the
European Union’s Waste Electrical and Electronic Equipment (WEEE)
directive. This directive requires producers of electrical and
electronic equipment to finance the take-back for re-use or
recycling of their products placed on the EU market after 2005.
Product packaging:Carton packing
Transportation method
2. Trains, ships, aircraft transport
