|
[China]
Trade Verify
Address: Address:No 8 Dejin Industrial Park Lishui Twon,Nahai,Foshan Guangdong China
Contact name:Ye
Foshan Subole Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
XL1050 Professional Power Amplifier 2 channel black in 2U for Stage performances, concerts, outdoor performances
Description
1, Quality assurance
A full range of advanced automatic limiting techniques ensure that audio signals remain high fidelity at all times and protect amplifiers and speakers from clipping distortion.
2, Convenience
Using SMD patches
Automated manufacturing processes such as laser scanning.
3, Cooling system
Professional amplifiers use a continuously variable fan and a T-type radiator that meets the standard specifications. The power tube is mounted directly on the heat sink. Using the principles of wind mechanics, heat dissipation is fast and power is operated at the most suitable temperature.
Quick Detail
| Model | XL-1050 | |
| TA 1KHz THD≤1% Stereo Power | 8 OHMS | 2×1050W |
| 4 OHMS | 2×1500W | |
| TA 1KHz THD≤1% Bridge Mono Power | 8 OHMS | 3000W |
Frequency Response | 10Hz-50KHz-1.5dB | |
Noise A-weighting | ＞100dB | |
Damping Coefficient | ＞200 | |
Maximum Input Level | 21dBV/9V | |
Slew Rate | ≥35V/μS | |
Channel Separation | ＞70dB | |
Input Sensitivity | 0.77V/1V/1.4V | |
Input Impedance(Equilibrium/Disequilibrium) | 20K OHMS/10K OHMS | |
Output Type | Class A | |
Power Dissipation (half-power,8 OHMS) | ＜1200W | |
Power Source | 220V-240V/50Hz | |
Cooling | Two variable speed fans | |
Protection | DC / short circuit / over voltage over current protection / soft start / power amplifier tube overheat protection / distortion limiting | |
Display | Power light (green), Protection light (red), Overload light (yellow), Signal light (green) | |
Input | Balanced input | |
Output | Professioanl binding post outputs | |
Panel Control | Left and right channel volume control, power switch control | |
Backplane Control |
Stereo / Parallel / bridge mono switch, 0.77v/1v/1.4v sensitivity switch | |
Dimension (mm) | 482×429.5×88(mm) | |
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
