|
[China]
Trade Verify
Address: Address:No 8 Dejin Industrial Park Lishui Twon,Nahai,Foshan Guangdong China
Contact name:Ye
Foshan Subole Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
XL-1300 Karaoke Power Amplifier with 2 Channels in 2U for Concert and Outdoor Performance
Description
1, Power Output: The amplifier provides a power output of 2×1300W. This means that each channel is capable of delivering 1300W of power. With two channels available, the total power output is 2600W. This power level is suitable for driving medium to large-sized karaoke setups, including speakers and subwoofers.
2, Karaoke-Specific Features: The amplifier may include features tailored for karaoke use. These features could include built-in digital signal processing (DSP) effects such as echo or reverb to enhance the karaoke experience. It may also have dedicated microphone inputs with individual controls for adjusting volume, tone, and effects.
3, Impedance Matching: It is important to ensure proper impedance matching between the amplifier and the speakers. The amplifier's specifications should include information about the supported speaker impedance range. Match the speaker's impedance with the amplifier's output impedance to ensure efficient power transfer and prevent potential damage to the equipment.
Quick Detail
| Model | XL-1300 | |
| TA 1KHz THD≤1% Stereo Power | 8 OHMS | 2×1300W |
| 4 OHMS | 2×1750W | |
| TA 1KHz THD≤1% Bridge Mono Power | 8 OHMS | 3500W |
| Frequency Response | 10Hz-50KHz-1.5dB | |
| (1KHz,0.775V,A) Noise A-weighting | ＞100dB | |
| (f=1KHz,8 OHMS) Damping Coefficient | ＞200 | |
Maximum Input Level | 21dBV/9V | |
Slew Rate | ≥35V/μS | |
Channel Separation | ＞70dB | |
Input Sensitivity | 0.77V/1V/1.4V | |
Input Impedance(Equilibrium/Disequilibrium) | 20K OHMS/10K OHMS | |
Output Type | Class A | |
| (8 OHMS) Power Dissipation (half-power,8 OHMS) | ＜1600W | |
Power Source | 220V-240V/50Hz | |
Cooling | Two variable speed fans | |
Protection | DC / short circuit / over voltage over current protection / soft start / power amplifier tube overheat protection / distortion limiting | |
Display | Power light (green), Protection light (red), Overload light (yellow), Signal light (green) | |
Input | Balanced input | |
Output | Professioanl binding post outputs | |
Panel Control | Left and right channel volume control, power switch control | |
Backplane Control |
Stereo / Parallel / bridge mono switch, 0.77v/1v/1.4v sensitivity switch | |
Dimension (mm) | 482×429.5×88(mm) | |
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
